UHF DIP Modbus RTU PLC Wireless Control Module

PLC Wireless Control Module Wireless Communication between 2 PLC Modbus RTU

Introduction:

LS-R324 is a 1W wireless DTU

Its control distance 2km

Use for wireless communication between 2 PLC

Instead the RS485 cable

Support Modbus RTU

Application:

Water/waste water treatment field

Wind speed, rainfall, humidity etc data collection

Temperature, humidity, concentrations of CO2 etc data collection

Wireless data collection and transmission

Wireless communication between PLC and sensors

Parameter:

Power output: 24V DC

RF power: 1W

Air baud rate: 1,200/2,400/4,800/9,600/19,200bps choose one

Interface baud rate: 1,200/2,400/4,800/9,600/19,200bps programmable

Frequency band: 433, 450, 470 or others

Interface: RS-232, RS-485 and USB

Communication mode: Half-duplex

Channel: 8(default), 16/32(customized)

Receive current: <45mA

Receive sensitivity: -123dBm @ 1,200bps); -118dBm @ 9,600bps)

Transmitting current: <500mA

RF line-of-sight range: 2km (BER=10-5@9600bps); 3km (BER=10-5 @ 1,200bps)

Size: 175*115*32mm (without antenna port)

Pin Definition:

Support RS232, RS485, USB, you can use DIP switch to program

About the LED indicator

a. When module is power on, POWER LED is always ON (red).

b. When module enter to set mode (DIP 8 ON), SET LED is always ON (red).

c. When module is transmitting,

     if you use RS232 port, RS232 LED blinks (green) regularly.

     if you use RS485 port, RS485 LED blinks (green) regularly.

     if you use USB port, USB LED blinks (green) regularly.

d. When module is receiving, RF LED blinks (blue) regularly.