1W Wireless Pump Controller Remote Pump ON OFF Control 2km Embedded Wireless Solution

1W Wireless Pump Control Remote Pump ON OFF Control Embedded Wireless Solution 2km

Hardware needed:

1. 12V DC Power supply

2. Floating switch (with high and low level)

3. LS-RDI00 (with antenna)

4. LS-RDO01(with antenna)

5. Pump

6. Solid state relay

Parameter:

System diagram

Tank side high level or low level, Pump side ON or OFF

When water level low, pump ON. When water level high, pump OFF

How to connect tank side---LS-RDI00

How to connect pump side---RDO01

About LS-RDIO controller

2 controllers should set with the same ID

2 controllers should set at the same channel

1 controller sets as master, 1 controller sets as salve

If you use different sets in the same area, please use different ID and channel for different sets.

Application area:

Wireless pump controls

Automate your tank level without running wire between the well pump and the tank. Wireless pump controls save you time and money.

Wireless tank level monitoring
simple wireless monitoring of your tank level from a remote location and receive critical status updates.

Wireless valve activation
Open or close electronic wireless valves, solenoid valves.

Smart agriculture

Pivot irrigation, soil pressure and temperature monitoring

Emergency Notification
Receive critical status updates by email, phone, cell phone, or PDA if equipment fails

Conveyor Control
Control a conveyor motor remotely

Remote Control Relay
Use dry contact inputs to control a remote relay.

Problem Notification
Save time in large facilities by activating an overhead notification light when a problem occurs, letting the supervisor know exactly where to go.

Dust Suppression
Use wireless I/O module to operate your dust

Data Logging
Wirelessly acquire and log various data from a remote location using our analog I/O module

Stacker Control
Start and stop your stacker/reclaimir. Connect PLC in control center with stacker and reclaimer.

Proximity Detection
Mount a transmitter with adjustable range on heavy equipment, mount a receiver in a “blind spot,” and then set up the receiver to sound an alarm or turn on a light whenever the equipment is operating in the area.

Chemical Level Monitoring
Monitor water chlorination or other chemicals remotely.

Traffic Signals
Avoid having to lay new wire by using wireless transmitters and receivers to control traffic signs such as “Railroad Crossing Ahead” when a train is present.

Grain Elevators
Our wireless transmitters and receivers can be used to monitor grain elevator conditions or control different functions. To collect RS485 data. To monitor temperature and humidity in Grain.

Freight Loading
Digital I/O module for crane control and analog I/O module to send the load information wirelessly to another location.