Applied To 1870mm Wide PVOH Water Soluble Release Film On Artificial Marble And Quartz Stone

PVA (polyvinyl alcohol) release film is a commonly used material in composite manufacturing processes. Here is some information about the use of PVA release film:

1. Purpose: PVA release film is primarily used as a release agent and surface protection material in composite molding. It creates a barrier between the composite part and the mold surface, preventing the part from sticking to the mold during the curing process.

2. Release Properties: PVA release film has excellent release properties, allowing for easy removal of the cured composite part from the mold without causing damage or leaving residue. It helps to achieve a smooth and high-quality surface finish on the composite part.

3. Compatibility: PVA release film is compatible with various types of molding materials, including polyester, vinyl ester, epoxy, and other thermosetting resins. It can be used with different mold surfaces, such as fiberglass, carbon fiber, and metal molds.

4. Application: PVA release film is typically applied to the mold surface before the lay-up or infusion process. It is commonly used in conjunction with mold release wax to ensure a release from a composite mold. It can also be used as a barrier in open air gel coat applications.

5. Water Solubility: PVA release film is water-soluble, which means it can be easily dissolved in water after the part has cured and released from the mold. This allows for easy cleanup and removal of the film from the mold surface.

PVA release film is a popular choice in composite manufacturing due to its effective release properties and ease of use. It helps to simplify the demolding process and improve the overall quality of the finished composite parts.

PVA release film is a water and alcohol-based polyvinyl alcohol (PVA) coating comprised of water-soluble, film forming materials. The dry PVA film is resistant to the solvents in the resin systemused to make composites parts but is soluble in water. It is particularly recommended as a parting agentfor separation between polyester or epoxy resins and various mold surfaces but may be used with most thermoset resins. PVA release film is not recommended for use with resin or substrates containing water or giving off water during cure. PVA release film parts easily from mold surface and is readily dissolved from molded parts and spray equipment with water. For most composite casting processes PVA release film is used over wax or other mold release agents.