Blue Whale 3 Frequency Automatic Industrial Ultrasonic Cleaner Machine

with Lifting System for Engine Block Turbocharger Metals

1. Product Features:

1). High quality stainless steel SUS304 thickened to 2.0mm material for the cleaning tank.
2). Exterior plate material stainless steel SUS304 in 1.0mm.
3). Transducers installed at the bottom of the tank with total 120pcs, ultrasonic power 6000W, ultrasonic frequency 40Khz/80Khz/120Khz three-frequency adjustable.
4). Equipped with 5 sets of three-frequency ultrasonic generator, which is placed on the upper part of the lifting support.
5). Heating: Installed with 3pcs of 6KW stainless steel heating tubes, total heating power 18KW, fast heating speed.
6). Temperature: Installed with digital display thermostat, from room temperature to highest 95C adjustable.
7). Filter cycle system: filter accuracy 10um.
8). Two aluminum alloy air knives are installed on the upper part of the tank body, the cylinder controls the air sweeping back and forth, the air port is pre-connected, and the cylinder lifting system is installed with compressed air from the user. The bearing capacity is greater than 30KGS.
9). Installed with electric inlet and drainage valves, installed with high and low level sensors, of which high level customers can manually set.
10). With stainless steel cleaning basket and segmented portable cover.
11). The whole machine adopts PLC process control.
 

2. Specification of LanJ-LH120​, we also can customize the products as per your requirements.

3. Cleaning Effect:

4. What types of objects are best suited for ultrasonic cleaning?

Ultrasonic cleaning is a versatile cleaning method that can be used for a wide range of objects, but it is particularly effective for cleaning objects that have complex shapes, hard-to-reach surfaces, or are delicate and require gentle cleaning. Some examples of objects that are well-suited for ultrasonic cleaning include:

Jewelry: Ultrasonic cleaning can effectively remove dirt, grime, and tarnish from all types of jewelry, including precious metals, gemstones, and delicate pieces.

Medical instruments: Ultrasonic cleaning is commonly used in healthcare settings to clean surgical instruments, such as forceps, scalpels, and other tools, as well as dental instruments and implants.

Electronics: Ultrasonic cleaning can effectively remove contaminants from electronic components, such as printed circuit boards, sensors, and other delicate parts, without damaging them.

Automotive parts: Ultrasonic cleaning can be used to clean a wide range of automotive parts, including carburetors, fuel injectors, and other engine components.

Industrial parts: Ultrasonic cleaning is commonly used in manufacturing and industrial settings to clean a wide range of parts and components, such as gears, bearings, and other metal parts.

Overall, ultrasonic cleaning is a versatile cleaning method that can be used for a wide range of objects and applications. It is particularly effective for cleaning objects that have complex shapes, hard-to-reach surfaces, or are delicate and require gentle cleaning.

5. What are the advantages of using ultrasonic cleaning over traditional cleaning methods?

Ultrasonic cleaning offers several advantages over traditional cleaning methods, including:

Greater cleaning efficiency: Ultrasonic cleaning uses high-frequency sound waves to create microscopic bubbles in the cleaning solution, which reach into small crevices and hard-to-reach areas that traditional cleaning methods might miss. This results in a more thorough and efficient cleaning process.

Reduced cleaning time: Ultrasonic cleaning is a faster cleaning method than traditional cleaning methods, as it can clean multiple objects at once and does not require manual scrubbing or wiping.

Improved cleaning quality: Ultrasonic cleaning provides consistent cleaning results from one cycle to the next, ensuring that objects are thoroughly cleaned every time. This can improve the overall quality of the cleaning process.

Reduced labor costs: Ultrasonic cleaning requires minimal labor, as the cleaning process is automated and does not require manual scrubbing or wiping. This can result in cost savings for businesses that use ultrasonic cleaning.

Environmentally-friendly: Ultrasonic cleaning uses a water-based cleaning solution that is biodegradable and environmentally-friendly, making it a more sustainable cleaning option than many traditional cleaning methods.

Non-destructive: Ultrasonic cleaning is a gentle cleaning method that does not damage delicate objects or surfaces, making it a suitable cleaning method for a wide range of applications.

Overall, ultrasonic cleaning offers several advantages over traditional cleaning methods, including greater cleaning efficiency, reduced cleaning time, improved cleaning quality, reduced labor costs, environmental-friendliness, and non-destructiveness.

6. What are some factors to consider when choosing an ultrasonic cleaning solution?

When choosing an ultrasonic cleaning solution, there are several factors to consider, including:

Object material: The cleaning solution should be compatible with the material of the objects being cleaned. Some materials may require a specialized cleaning solution to avoid damage or discoloration.

Contaminant type: The cleaning solution should be designed to effectively remove the specific type of contaminants to be cleaned, such as oil, grease, rust, or other residues.

Cleaning time: The cleaning solution should be able to effectively clean the objects within a reasonable amount of time, without requiring an excessive cleaning cycle.

Temperature range: The cleaning solution should be able to operate within the temperature range required for the specific objects being cleaned.

Concentration level: The cleaning solution should be used at the appropriate concentration level, as using too much or too little cleaning solution can affect the cleaning performance and efficiency.

Environmental impact: The cleaning solution should be environmentally-friendly and avoid the use of harmful or toxic chemicals.

Cost: The cost of the cleaning solution should be considered, as some specialized cleaning solutions may be more expensive than others.

Overall, it's important to choose an ultrasonic cleaning solution that is compatible with the specific objects being cleaned and the type of contaminants to be removed, while also considering factors such as cleaning time, temperature range, concentration level, environmental impact, and cost.