Matters needing attention
1. Must choose the power supply voltage: DC5V or DC8-30V
2. Must choose leaf spring plate model number if you select hollow
shaft encoder
3. Please advise the motor speed (RPM) that you actually use
4. If you have any other requirements, please provide detail
parameters
Related part number of K48 Series
K48-J6E2048Q12
K48-J6C2500Q10
K48-J12E2000/4Q8
K48-J12C2500/8Q6
K48-J6E3600B12
K48-J6C1024B10
K48-J12E1200/6B8
K48-J12C1200/8B6
K48-J12E1000/6Q12
K48-J12C1000/16Q10
K48 Series encoder Specification
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 48mm |
| Thickness | 34mm |
| Installation dimension | 40mm(spring plate 48T40) |
| Resolution | 50;60;100;200;250;256;300;360;400;450;500;512;600;1000;
1024;1200;2000;2048;2500; 4096;5000;8192 |
| | 1000/4;1000/6;1000/8;1024/4;1024/6；1024/8；2000/4；
2000/6；2000/8；2048/4；2048/6;2048/8；2500/4；2500/6；2500/8;4096/4;4096/6;4096/8;5000/4;5000/6;5000/8;8192/4;
8192/6;8192/8 |
| Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
| Supply voltage | DC5V ; DC8--30V |
| Outlet type | Cable out from side |
| Output mode | NPN/PNP(Open Collector Output) |
| | Voltage output |
| | Push-pull output |
| | line drive (26LS31) TTL |
| | line drive(DC8-30V) HTL |
| | TTL(DC5V) phase ABZ are back of phase UVW |
| Protection grade | IP40 |
| Cable length | 500mm |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| Insulation strength | AC500V 60s |
| Insulation resistance | 10MΩ |
| GND | not connect to encoder |
Signal Circuit of encoder
1. The NPN Open Collector -- The NPN Open Collector(NPN) is an
interface based on an output circuit with an NPN transistor.
An open collector is the unconnected collector connection of an NPN
transistor, whose emitter is connected to earth and whose collector
is connected to the output.
2. PNP output
The PNP output is an interface based on an output circuit with a
PNP transistor.
3. Push-Pull output(HTL)
High Voltage Transistor Logic functions with a voltage supply in
the range 10 and 30 V DC, with 24 V DC being the most usual.
“Low” is defined as an output of between 0 V and 3 V and “high” as
between VCC and VCC - 3.5 V.
4. TTL RS-422 output
In a transistor-transistor logic (TTL), both the logical status and
the amplification are done by transistors, hence the name.
The TTL output is supplied with either a fixed 5 V voltage or a
variable voltage of between 10 and 32 V. For this the low range is
defined as the ≤ 0.4 V and the high range as ≥ 2.4 V.
Advantage of “HENGXIANG” encoder factory
· Over 18 years encoder production experience
· More than 20 years experienced engineers
· Professional working team
· High quality standard
· Quick Response time
· Utility Model Patent Certificate
· Own brand and unique brand
· CE certification for all models
· Prompt delivery date
· 100% full inspection before shipment
