Best price Incremental Optical Rotary Encoder S18 DC5-24V up to
1600ppr
Prodution Paramenters
| Brand | HENGXIANG |
| External dimensions | External diameter: 18mm |
| Thickness: 18mm |
| Solid Shaft Diameter: ⌀2.5mm |
| Resolution | 36;50;60;100;200;250;256;300;360;400;500;512;720;800;1000;1024；1440;1600 |
| Output phase | Phase A,B,Z |
| Supply voltage | DC5V ; DC8-30V |
| Outlettype | Cable out from side |
| Cable out from back |
| Output mode | Collector open circuit output(NPN &PNP) |
| Environmental temperature | Operating temperature: -20~+80° (Non icing) |
| Storage temperature: -25~+85° (Non icing) |
| Environmental humanity | Operating and storage: 35~85%RH (non-condensing) |
| Top Resonse Frequency | 100kHz Max |
| Top Rev | 5000rpm |
| Protection grade | IP50 |
| Consumption current | 50mA Max |
| Rise/ Fall time | 100nsec Max |
| Shaft Load | Radial: 2N; Axial:2N |
| Vibration(endure) | Amplitude 0.75mm,10-50Hz,1 hour for X/Y/Z direction individually |
| Shock(endure) | 49/m/s2,three times for X,Y,Z direction individually |
| Shaft Material | 304 stainless steel |
| Cable length | 150mm |
| Shell | Aluminium Alloy |
| Package | Carton box |
| Net weight | About 20g (with package) |
| Certification | CE |
Principle of encoder
An incremental rotary encoder outputs a certain amount of Pulses
per Revolution. The higher this PPR number, the smaller the angle
between each pulse. This PPR number is fixed for ordinary
incremental encoders. Programmable incremental encoders can adjust
this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422
(TTL) output driver, these have replaced most of the older output
circuits like Open Collector NPN, Open Collector PNP, Voltage
Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a
signal level which corresponds to the applied supply voltage. The
supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to
replace true open collector circuits by using an external diode
connected in a way to limit the direction of the current for RS422
(TTL) circuits provide a constant 5 V signal level that is not
dependent on the supply voltage. Two supply voltage ranges can be
selected: From 4.75 to 5.5 VDC (can be used to replace open
collector output drivers) or from 8 to 30 VDC. Using differential
signals the output fully complies to the RS422 standard.
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and
ship on time
Payment terms:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Shipment
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if
freight collector
If you do not have any courier account, we will check and find a
cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price
could be as cheap as possible.
More information
If you are looking for more information about our factory or about
our products, please contact us or email us right now, we will
reply you as soon as possible.
