H25E-F1-SS-2048--ABZC-28V/5-SCS18-S incremental equivalent encoder
S65F square flange shaft seal for the industrial mark
| Items | Basic parameters |
| External dimensions | External diameter: 65mm,Thickness: 56mm |
| Installation Size:48mm, Flange:67*67*7mm |
| Shaft diameter: 8mm |
| Resolution | 50;60;100;200;250;256;300;360;400;450;500;512;600;720;1000 |
| 1000;1024;1200;1250;1440;1800;2000;2048;2500;2880;3000; |
| | 3600;4000;4096;5000;5760;8192;10000;11520;16384;20000; 23040 |
| Output phase | Phase A,B,Z or A- B- Z- |
| Supply voltage | DC5V & DC8-30V |
| Outlettype | Cable out from side with metal sleeve |
| Socket out from side |
| | NPN/PNP(Open Collector Output) |
| | Voltage output |
| Output mode | Push-pull output |
| | line drive (26LS31) TTL |
| | line drive(DC8-30V) HTL |
| Environmental temperature | Operating temperature: -20~+80° (Non icing) |
| Storage temperature: -25~+85° (Non icing) |
| Environmental humanity | Operating and storage: 35~85%RH (non-condensing) |
| Protection grade | IP50 & IP65 |
| Cable length | 1M (cable length could be added appropriately by |
| require, but it need payment individually) |
| Shell | Aluminium |
| package | Carton box |
| Net weight | About 370g (with package) |
| Certification | CE | |
Principle of encoder
An incremental rotary encoder outputs a certain amount of Pulses
per Revolution. The higher this PPR number, the smaller the angle
between each pulse. This PPR number is fixed for ordinary
incremental encoders. Programmable incremental encoders can adjust
this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422
(TTL) output driver, these have replaced most of the older output
circuits like Open Collector NPN, Open Collector PNP, Voltage
Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a
signal level which corresponds to the applied supply voltage. The
supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to
replace true open collector circuits by using an external diode
connected in a way to limit the direction of the current for RS422
(TTL) circuits provide a constant 5 V signal level that is not
dependent on the supply voltage. Two supply voltage ranges can be
selected: From 4.75 to 5.5 VDC (can be used to replace open
collector output drivers) or from 8 to 30 VDC. Using differential
signals the output fully complies to the RS422 standard.
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and
ship on time
Payment terms:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Shipment
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if
freight collector
If you do not have any courier account, we will check and find a
cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price
could be as cheap as possible.
More information
If you are looking for more information about our factory or about
our products, please contact us or email us right now, we will
reply you as soon as possible.
