Mooncake Box/Magnetic Box Pressure Sensitive Adhesive Courier Bag PE Film Bonding

Mooncake Box/Magnetic Box Pressure Sensitive Adhesive Courier Bag PE Film Bonding

GE225 EVA Glue Catalog.pdf

How to use
1. Prepare the surface: Make sure the surface to be bonded is clean, dry, free of oil and dust. For special surfaces, pretreatment may be required, such as sanding or primer.
2. Select the pressure-sensitive adhesive: Select the appropriate type of pressure-sensitive adhesive according to the application requirements, such as tape, liquid adhesive, etc.
3. Apply or paste:
    For liquid pressure-sensitive adhesive, use a brush, scraper or screen printing method to evenly apply it on the bonded surface.
    For tape-type pressure-sensitive adhesive, directly tear off the protective film and paste the tape on the bonded surface.
4. Apply pressure: Gently press the bonded surface with your hands or tools to ensure that the pressure-sensitive adhesive is in full contact with the bonded object and eliminate bubbles.
5. Standing and curing: Depending on the type of pressure-sensitive adhesive and the application environment, let it stand at room temperature for a period of time so that the bonding strength can be gradually established.
6. Inspection and adjustment: Check the bonding effect and adjust or replenish the pressure-sensitive adhesive if necessary.

When using pressure-sensitive adhesive products, you need to pay attention to the following points:

1. Choose the appropriate type and specification of pressure-sensitive adhesive to meet specific application requirements.
2. Ensure that the bonded surface is clean, dry, and free of impurities such as oil and dust to improve the bonding effect.
3. Follow the operating instructions in the product manual and perform the bonding operation correctly.
4. Avoid using pressure-sensitive adhesive in an environment with too high or too low temperature to avoid affecting its bonding performance.

Other Product Recommend

Automatic Rigid Box Making Machine / Book - Type Box Assembly Machine​

Main Parameter:

Trends in research and development of pressure sensitive adhesives:

1: Waterborne polyurethane pressure-sensitive adhesives will become the development direction of pressure-sensitive adhesives in the future because of its environmental protection and pollution-free characteristics; the cost is slightly higher than that of acrylic acid, which is generally used in relatively high industries;

2: acrylic emulsion pressure sensitive adhesive and acrylic solvent pressure sensitive adhesive, pressure sensitive adhesive has poor water resistance, moisture resistance and heat resistance, so improving these properties is very important, otherwise it is difficult to replace solvent type pressure sensitive adhesive.

3: Solvent-based pressure-sensitive adhesives are widely used in the field of functional pressure-sensitive adhesives, such as industrial insulating tapes, because of their good production performance.

Our Packing