Description:
Tungsten carbide rod is a new technology and new material which is
mainly used in metal cutting tools manufacturing, wood, plastics
required hardness and wear resistance and corrosion resistant
products manufacturing and other industries.
Tungsten Carbide products are widely used as tool material, such as
turning tool, milling cutter, planer knife, bit, boring cutter,
etc., used for cutting cast iron, non-ferrous metal, plastics,
chemical fiber, graphite, glass, stone and ordinary steel, also can
be used for cutting refractory steel, stainless steel, high
manganese steel, tool steel and other difficult materials.
Tungsten Carbide round rod is a tungsten steel round rod.In simple
terms, a tungsten steel round rod or a hard alloy round
rod.Tungsten carbide round bar/rod has high hardness, wear
resistance, good strength and toughness, heat resistance, corrosion
resistance and a series of excellent properties, especially its
high hardness and wear resistance. Even at 500 ℃ temperature,
itself is basicly remains the same. There are still very high
hardness at 1000 ℃. Hard Alloy Bars Blank or strip has high hardness and high wear
resistance, it is a ideal choice to used in cutting kinds of wood. With high quality raw material and advanced equipment, G.S.carbide
provides customer superior quality carbide strips. - Easy to be brazed, good wear resistance and toughness.
- Untrafine grain size raw material to keep excellent strength and
hardness.
- Both standard sizes and customizes sizes are available.
Grade: | GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended | | RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood
or nonferrous metal, ceramic and other alloys. | | RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation.
Suitable for rosewood, solid wood, pinewood, and other wood with a
lot stammer. | | RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal,
ceramic and other alloying, semifinishing of of hardwood,
chipboard, MDF and HDF. Better to use silver soldering. | | AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger
jointing tool. |
|
