Hydraulic Tension Stringing Equipment 120KN Overhead Line Stringing
Equipment
Structure Parameter
| Bottom diameter of tension wheel groove | 1300/1500mm |
| Trial traverse diameter | 40mm |
| Slot number | 2x5 |
| Total weight | 6000kg |
| Boundary dimension | 4700×2300×2700mm |
Performance Parameter
| Maximum intermittent tension | 2x60KN |
| Maximum sustained tension | 2x55KN |
| Correspending speed | 5km/h |
| Maximum pay-off speed | 5km/h |
| Corresponding tension | 2x25KN |
| Maximum back-traping force | 2x55KN/ 110KN |
Main Configuration Instructions
| Engine | Cummins |
| Reduction gear | German Rexroth |
| Hydraulic motor | German Rexroth |
| Pressure gage | German |
| Pressure pump | German Rexroth |
Engine
| Feeding | diesel |
| Cooling system | water |
| Electric system | 24V |
Product Introduction
Hydraulic tensioner GL 2×60 fit to string oneconductors or optical
fiber cable.
One hydraulic circuit to tension at constant force even varying the
speed of stringing.
One pair of steel capstans lined with multi-grooved nylon
sectors.
Machine control panel equipped with hydraulic dynamometer and
mechanical metercounter.
Device for setting the pull force, that adjust the speed in
order to maintain the force set.
Chassis with rigid axle, manual brake and detachable drawbar
for towing at low speed in workplace.
Stabilisers, share and attachments for anchoring the machine.
Heat exchanger to cool the oil in the hydraulic circuit.
Reelwinder fit for a 1600-mm-dia real, with automatic
ropewinder.
