SWT25080H AC220V Automatic Cable Tie Tool For Cable Harness Assembly

SWT25080H AC220V Automatic Cable Tie Tool For Cable Harness Assembly

SWT25080H Nylon Cable Tie Cutting Machine For Cable Harness Assembly

SWT25080H nylon cable tie machine can deal with the shortest nylon cable ties, T25080, width 2.5mm* length 80mm.

Features of automatic cable tie machine

1. The bundle packing speed is 0.7S. And tying by hand takes 6second. Automatic cable tie machine can replace 2 or 3 workers.

2. Operator pulls the trigger of tie gun, cable tie would be budled, tighten and cut off the excess tail. And the waste tail would be collected into a box.

3. Easy to adjuste the binding forces.

Number 0 means 2kgf.  NO 1 means 3.5kgf, NO 2 means 5.0 kgf....

4. Save labor cost and time, protect workers' hands. If tie nylon cable ties by hand, it is easy to hurt hands.

5. It is actived by electricity and air source.

6. Be suitable for tightening those components which has step features, wire harness, soft tubes etc.

7. Voltage: AC220V, 50/60Hz, 1 phase; Pneumatic pressure: 5kg/cm².

Technical data

Machine structures

1. The vibration bowl: put nylon cable ties into it, then they would be managed one by one. Pls don't put too much, or the vibrating effect will not be very good.

2. Pressure sensor: detect the pressure and detect if cable ties are jammed.

4. The feeding tube: Cable ties would be blown into the cable tie gun through it.

Packing info

Host machine/wooden case, 74cm * 70cm * 85cm,G.W./kg: 97kg

Vibration bowl/wooden case, 67cm * 55cm * 63cm, G.W./kg:  66kg

FAQ