Hall Effect 3 Phase BLDC Motor Controller Rotating Direction Control Ports
|
Detailed Product Description
|
JYQD-V7.0 ,12V/24VDC DC,2A working current BLDC motor controller
for Hall effect BLDC motor
Application guidelines 1. Confirm that the voltage and power parameters of the motor not
exceed the range as specified. 2. Applicable to hall brushless dc motor with Hall at 120°, not all
manufacturers' Hall line sequence are corresponding, you can adjust
the Hall line sequence or motor three-phase line sequence according
to the actual situation, to achieve the best driving effect. 3. JYQD-V7.0 is driver board without housing and heatsink, it can
drive the motor below 36 watt without any heatsink, but needs
normal ventilation. 4. The 5V output port on the drive board is forbidden to connect
external power equipment. It is only applicable to external
potentiometer or switch for speed adjustment, commutation and
enabling operation Wiring diagram 1. Control port 5V —Driver board internal output voltage, external potentiometer or
switch for speed adjustment and reversing operation Z/F —Rotating direction control ports. Connect “5V” high level or no
connect is Forward direction, connect 0 V low level or connect to
GND is reverse direction. VR —Speed control port. Analog voltage linear speed regulation 0.1v
-5V, The input resistance is 20K Ohm ,connect with GND when input
PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100% SC—Enable port control. Connect 5V or no connect to allow operation,
connect GND to forbid operation. GND—Used for Drive board internal control 2. Power port MA ----motor phase A MB ---- motor phase B MC---- motor phase C GND----DC- VCC----DC + 3:Hall sensor port Ha--- Hall a Hb---Hall b Hc---Hall c GND---GND 5V---5V output 4. Use shielded wires if the drivers board has more than 50 cm
distance from the motor, otherwise it may lead to abnormal driving,
affecting the normal use. 5. Control port distance: 2.54mm,Power port distance:2.54 mm 6. Pay attention to the insulation between the driver MOSFET and
the heatsink or the installation plate. Dimensional drawing
DOWNLOAD JYQD-V7.0 USER MANUAL |
||||||||
| Product Tags: 3 phase ac motor controller three phase pwm motor driver |
Related Products
|
Compact 3mm X 3mm 3 Phase BLDC Motor Driver with Hall Sensor Compatibility and Reference Input 0-5v / PWM / Frequency |
|
JUYI Rectangle 3 Phases 12V 24V 36V Hall Sensor Good Quality Motor Driver bldc Motor Controller with Technical Support JYQD-V7.3E2 |
|
JUYI 48V BLDC Motor Controller JYQD-YL01D With Fast Reverse Brake Function |
|
JUYI Motor Tachometer Module Adjust Number Of Pulses |
|
JUYI V7.02 brushless DC three phase Hall motor driver low voltage high power controller 12V 24V 60A |
|
JUYI JYQD-V8.3E Mini Size Sensorless 3 Phase BLDC Motor Driver Board With PWM Speed Control Motor Controller |
Email to this supplier