1300KN Nominal Force Scrap Metal Baler Bale Size 250*250mm

Feature of metal baler

1. Driven by hydraulic pressure. It works smoothly and safely.

2. Manual or PLC automatic control mode is adopted.

3. The discharging forms are: rollover bale, roll bale, forward bale or no bale.

4. Installation does not require sole screw, where there is no power supply, diesel engine can be used as power.

5. Product specifications and types: Metal balers have 63-600 tons, 10 varieties and more than 20 specifications, which can meet the different needs of customers at different levels.

Application industry of  metal baler  

Scrap metal baler machine can squeeze various metal raw materials into qualified materials, and the recycling and processing industry and necessary equipment of metal smelting industry

(1). Extrusion of waste metal materials

Scrap metal baler can extrude waste metal raw materials into qualified materials, such as extrusion waste oil barrel, extrusion metal scrap, extrusion steel scrap, extrusion steel shavings, extrusion copper scrap, extrusion iron scrap, extrusion aluminum scrap, extrusion automobile shell, extrusion aluminum shavings and so on. After extrusion, the waste metal raw materials become qualified charge.

(2). Convenient recycling of waste metal

The shape of the extruded scrap is cylinder or cuboid. It is convenient for the storage, transportation or recycling of materials.

(3). Widely used in food, medicine, hardware, chemical industry, clothing, post and other industries, suitable for carton baling, paper baling, letter baling, medicine baling, light industry baling, hardware baling, ceramic baling, auto parts baling, daily chemical baling.

working principle of metal baler

One is to run the scrap metal baler machine with no load, start the motor oil pump, the spool of the directional valve is in the middle, the output oil of the oil pump returns to the oil cylinder through the electro-hydraulic directional valve under the pressure regulated by the relief valve, and the system is unola. The second is the hydraulic packing action. When the oil pump is working, the output of the oil pump enters through the control valve under the regulated pressure through the directional valve. The piston rod behind the main cylinder chamber slowly drops, and the oil in front of the cylinder is Rutu. The oil tank is connected to the oil tank through the reversing valve, and the packing machine realizes the packing function; finally, the metal hydraulic packer is reset, and the oil pump works, and the output of the oil pump is transferred to the front chamber of the main oil cylinder under the regulated pressure, and the oil returns to the oil tank and the packing box at the rear of the oil cylinder, and the oil tank returns.