MK9 Mark 9 Molins Adhesive Applier For Packing Machines

MK9 Mark 9 Molins Adhesive Applier For Packing Machines

Glue Applicator / Glue Gun is a component assembled in both cigarette makers and packers, applying glue to different paper materials.

Product Features

Hard and tough

Stainless

Acid-resistance

Rust-proof

conversion coating

Mid-Temperature Black Oxide

Stable output

For hot glue & white emulsion

Hardened

Magnetite processed

Anti corrosion

Anti rust

Long functional life

Corrosion proof

Cold Black Oxide

Surface enhanced

copper selenium compound

Ferrous Materials

Additional Services:

For requirement of specific certification to meet import regulations of certain nations, please inform us before order to get products certified in case they are not yet.

Before business actually starts, we are always more than willing to send you samples(wear parts/ consumables/ spares / materials) for a quality test, if necessary.

You are always welcome to our office for a face to face talk, and also to our plants for an on-site inspection. Please inform us of your journey plan beforehand so that we could meet you at the airport and take you to plants.

We provide off-line engineering support for installation of complete machines if requested.

Ferric Oxide For

hot melt adhesives provide several advantages over solvent-based adhesives. Volatile organic compounds are reduced or eliminated, and the drying or curing step is eliminated. Hot melt adhesives have long shelf life and usually can be disposed of without special precautions. Some of the disadvantages involve thermal load of the substrate, limiting use to substrates not sensitive to higher temperatures, and loss of bond strength at higher temperatures, up to complete melting of the adhesive. This can be reduced by using a reactive adhesive that after solidifying undergoes further curing e.g., by moisture (e.g., reactive urethanes and silicones), or is cured by ultraviolet radiation. Some HMAs may not be resistant to chemical attacks and weathering. HMAs do not lose thickness during solidifying; solvent-based adhesives may lose up to 50–70% of layer thickness during drying.