Construction 25x2mm Steel Bar Grating Hot Dipped Galvanized For Platform Walkway

25x2mm ISO Hot Dipped Galvanized Steel Bar Grating Platfrom Walkway

Introduction of Products

Steel grid surface treatment: Hot dip galvanized, cold galvanized, paint, dip anti-rust oil, do not deal with (general stainless steel do not deal with).

Method of making steel lattice plate: Pressed-welded steel grid is made up of load flat steel and horizontal bar arranged in warp and weft at a certain distance. It is welded into the original plate by hydraulic resistance welding automation equipment of 200 tons, and processed into the product required by customers through cutting, opening, edge packing and other procedures.

Load flat steel spacing:
The center distance between two adjacent flat steel receiving loads is usually 30MM and 40MM.

Cross bar spacing:
The center spacing of two adjacent cross bars is usually 50MM, 100, two kinds, can be produced according to customer requirements.
Superiority:
Material saving:
The most economical way of material under the same load condition, correspondingly, can reduce the material of supporting structure.
Reduce investment:
Save material, save labor, save time limit, avoid cleaning and maintenance.
Construction is simple:
In the pre-installed support with bolts clamped or welded fixed, one person can complete.

Platform steel grating is also known as "hot dip galvanized steel grid platform", it is a widely used steel grid products, this kind of steel grid in all fields of industry the most widely used, has the strongest resistance to surface impact, especially the steel grid bar spacing of 50mm has a strong ability to resist side impact.