Metal Grid Plate Stainless Steel Grid Mesh Floor Steel Grating 6000x1000mm

Industrial 6000*1000mm metal grid plate stainless steel grid mesh floor steel grating

            Steel Grating is made by the world first-class Italian ORSOGRIL equipment,which can arrange the bearing bar and cross bar in longitude and latitude order to certain distance. Cross bar is pressed into the bearing bar by high tension resistance welding which is controlled by computer. So we can produce high quality grating with firm welding,smooth surface and high strength.

HOT GALVANIZING

Normally,Hot galvanizing will be carried out after end welding process,For the thickness of bearing bars is not less than 5mm,the weight of average Zinc Layer will not be less than 610g/m2.When the thickness of bearing bars is less than 5mm,the weight of average Zinc Layer Will not be less than 460g/m2. The quality and requirements after hot galvanizing are subject to the standards of GB/T 13912.

LACQUERING

To again protection layer through the ways of spraying,brushing and soaking.

SERVICE LIFE OF HOT GALVANIZING

Coated zinc thickness of 100um,the anticipated life of products in various circumstances.

ANTI-ACID AND ALKALI CORROSSION CAPACITY

The range of PH6 to PH12.5,a stable protective film will be formed on the zinc surface.it has good

anti-corrosive property.