colored headlight film

Protective film for car lamp provides a protective barrier to scratch,mark,damage and dirt at the process of bending,pressing,roll forming,transportation and installation.'

Specification:

 1.Base Material:polyethylene

 2.Thickness:30micron-120micron(0.03mm-0.12mm)

 3.Width:10mm-2000mm

 4.Length:100m-2500m

 5.Adhesive strength:450-1500g/50mm

 6.Colors:transparent,blue,green,white,black and white(can be printed as order)

 7.Elongation:>300% 8.Adhesive:acrylic or waterbasedresin adhesive

Installing step:

1.Spray suitable water to clear the headlight;
2.Cover the lamp carefully and evenly

3. Heat is needed to make sure the film can be firmly sticked.
4. Cut the edge of the rim charge
5. Heat again to make sure the film sticks well