26GHz Industrial Tank Level Transmitter Non Contact Radar Level Sensor For Liquids

Top Quality 26GHz Industrial Tank Level Transmitter Non Contact Buy Radar Level Sensor For Liquids

FL301 electromagnetic flowmeter can be used to measure the volume flow of conductive fluid in closed pipelines. It is widely used in flow measurement and control in the fields of chemical petroleum industry, metallurgical industry, water and wastewater, agriculture and irrigation, paper making, food and beverage industry, pharmaceutical industry and so on.

When the conductive fluid flows through the measuring tube of the sensor, a voltage signal proportional to the average flow velocity of the fluid is induced on the electrodes. The signal is amplified by the transmitter to realize various display functions.

Speifications

Main features

1. No moving assembly, no abrasion

2. Turn down ratio: 1:100

3. No flow lifting device

4. Applicable to various electronic conductive liquids

5. Not influenced by temperature, viscosity, pressure and density

6. Corrosion protection and self-diagnosis

7.Measure both to and reverse flow

8. Super large display, easy to operate

9. Long-term EEPROM, save data when power off

10. Support MODBUS/HART communication protocol

Electromagnetic Flow Meter Features

1) DN 6 to DN2000 cover a broad range of pipe sizes.
2) There are no obstacles in the pipeline, no pressure loss, and the requirements for straight pipelines are relatively low.
3) The RS485 or RS232 interface supports digital communication.
4) Multiple liners and electrodes are available to meet different flow characteristics
5) Easy to install and maintain