VPI900 Vacuum Pressure Impregnation Equipment

Notes: The size of the vacuum impregnation tank can be customized.

1.1pressurizing and impregnating

cylinder, specification: Φ900×900mm, 1 piece;

1.2 working pressure: 0-0.6MPA (adjustable);

1.3 working vacuum degree:100- 200Pa;

1.4 material: head: 16MnR; body: Q345-R; flange: Q-235-B forging parts;

1.5 The impregnating tank cover is opened and closed with the help of a hydraulic mechanism. The opening, closing, locking, and unlocking are all driven by the hydraulic cylinder. The movement signal is returned by non-contact proximity switch. The tank opening angel is well designed so that the projection of the top point of cover casts over the tank inner wall. In this way, when the tank cover is opened, the jobs could be loaded into the tank easily.

1.6 The impregnating tank is equipped with overpressure alarm, and pressure safety device.

1.7 The impregnating tank is designed with one peephole light and one observation windows.

1.8 The impregnating tank is sealed by a silicon rubber ring.

1.9 The flange used for the impregnating tank is made of Q235-B forging parts.

1.10 When the impregnating tank cover is opened, the tank has safety interlock mechanism.

1.11 The tank inside is built with weight bearing stand which can bear a maximum weight of 20T.

1.12 The impregnation tank is equipped with the level transmitter.

4.1 This vacuum pumping system includes 1 set of 2X-30 rotary vane pump, and 1 set of ZJ300 roots pump.

4.2 max air suction speed: 300L/S;

4.3 vacuum buffer tank to prevent vapor

from coming into the vacuum unit.

4.4 The waste gas of the vacuum system

first goes through a mechanical trap condenser before

entering the atmosphere. The condensed liquid will be let out manually.

4.5 The vacuum valves used are of high vacuum pneumatic ones.

4.6 intelligent digital magnetic resistance vacuum meter, and absolute pressure transmitter.

4.7 electrical contact vacuum meter, electrical contact pressure gauge.