100KW Electric Rotary Heat Treatment Furnace For Dirt Heating
Application of Electric Heat Treat Furnace heat treat furnace
The electric resistance furnace is cyclic furnace which is used for
heating dirt or powder. The furnace has a rotary furnace tank. The
furnace tank is heated during rotation, so that the material is
heated evenly.
Technical Parameters of Electric Heat Treatment Furnace heat treat furnace | No. | Item | Parameter | | 1 | Effective working size | ф750×1500mmmm (Diameter*Length, about 662L) | | 2 | Material filling rate | 20%, about 200kg | | 3 | Rated temperature | 950℃ | | 4 | Commonly used temperature | 550-950℃ | | 5 | Power supply | 415V AC; 50±0.5HZ；380V,3 phase 4 wire | | 6 | Total power | <110KW(1-100% adjustable) | | 7 | Furnace body heating power | 100KW (adjustable) | | 8 | Temperature control method | PID, SCR control, GR858P programmable temperature controller with
over temperature alarm | | 9 | Control zone | 1 zone + 1 point temperature measurement | | 10 | Furnace surface temperature rise | ≤35°C | | 11 | Environment temperature | -20°C to 50°C | | 12 | Environment humidity | Less than 85% R.H |
|
Supply Scope of Electric Heat Treat Furnace
heat treatment furnace | No. | Item | Specification | Q’ty | | 1 | Muffle tank | 321 stainless steel, thick 10 mm | 1 set | | 2 | Furnace body and tilting mechanism | Up tilt 20 degree, Down tilt 60 degree(adjustable) | 1 set | | 3 | baffle | 321 stainless steel, thick 8mm | 1 set | | 4 | reducer | Grade 4, Power 3KW | | | 5 | Reducer for tilting device | 3KW | 1 set | | 6 | Pre compressed fiber block | Aluminum silicate fiber | | | 7 | Frequency conversion | 50Hz,3-20r/min (muffle tank) | 1 set | | 8 | SCR | KS-600A | 3 sets | | 9 | thermocouple | 0-1100℃ | 2 pcs | | 10 | Temperature controller | programmable | 1 pc | | 11 | Heating resistor | 100KW,0Cr21AL6Nb high temperature alloy stripe | 1 set | | 12 | Cooling fan | 1.1Kw | 1 set | | 13 | Electrical component | Time relay, breaker, operation button, emergency stop, linkage
protection system | 1 set | | 14 | cabinet | | 1 set | | 15 | Stainless steel plate | 321 | 1 set | | 16 | Compensating lead wire | 25 Meters,wire diameter: 1.5mm2 | 1 set | | 17 | Operation manual | | 1 set |
|
Company Introduction
our company is a professional supplier of heat treat/ treatment
furnaces such as
box type heat treatment furnace, bogie type heat treatment furnace,
pit type heat treat furnace,
carburizing heat treatment furnace, nitriding heat treat furnace,
salt bath heat treatment furnace,
steel wire annealing heat treat furnace, etc.
heat treatment furnace
|
