PLC Controlled Vacuum Pressure Impregnation Equipment VPI 2800 * 3500 mm

PLC Controlled Vacuum Pressure Impregnation Equipment VPI 2800 * 3500 mm

Introduction

High vacuum pressure impregnation equipment is the key equipment for insulation treatment of high voltage motors, special

anti-explosion motors, and transformers. The vacuum impregnating treatment enhances the mechanical strength, insulation,

anti-moisture and anti-mold performance of the windings.

Installation, test-running and training is provided on the buyer’s site. The foundation drawing is also provided.

Parameters :

Vacuum Pressurizing Impregnation Equipment Tank 1 Set

Features

The impregnating tank cover is opened and closed with the help of a hydraulic mechanism. The signal is feedback through

non-contact proximity switch. The tank cover opening angle follows the rule that the top point of the opened cover passes

over the inner wall of the impregnating tank.

The impregnating tank is equipped with a level transmitter.

The impregnating tank is equipped with an over-pressure alarm, and a pressure safety device.

The impregnating tank is designed with one anti-explosion peephole light and one observation window.

The impregnating tank is sealed by a silicon rubber ring.

When the impregnating tank cover is opened, the tank has safety interlock mechanism.

The resin is supplied into the impregnating tank through the tank bottom.

The vacuum pressure impregnation system tank is built with a weight bearing stand which can tolerate 30ton.

The impregnating tank is a vertical type.

The impregnation tank is equipped with a camera so as to check the inside working performance.

Supply Scope

Youtube link of vacuum pressure impregnation equipment 

  https://youtu.be/EWkfmRQbxHE