Red Orange Yellow White Blue TDS Meter Tester , Water Purity Test Meter

With Temperature Measurement Function Water Purity Test Meter Pen​ :

Product Applications Of Water Purity Test Meter Pen :
1. Drinking water: After a long-term placement of pure water, mineral water and bottled water, the TDS value will rise too high from the beginning, and the total number of viruses and colonies will increase accordingly. At this time, it is not possible to have this raw drink as it affects health.
2. Water storage tank: Users above the third floor will be supplied with water from the top storage tank, which will cause secondary pollution. The change of TDS value should be detected frequently, and the property management department may be urged to clean it regularly.
3. Washing machine: How much laundry should be put in the washing machine, and the experience can be digitized by TDS testing. After the cleaning procedure, the value of the pre-drainage test is treated as clean as the tap water. If the value exceeds the tap water, the amount of laundry should be reduced.
4. Swimming pool detection: The change of cleanliness of the pool water can be measured during swimming, you should pay attention to it if the indication value is too high.
5. Wash vegetables and fruits: If fruits and vegetables are soaked in water, you should measure the TDS value, if there is a high level, chemical contamination may be suspected and attention should be paid.
6. Natural water: In each region, the city has different TDS values due to different pipelines and water sources. The northern hard water contains calcium and magnesium ions, and the TDS value is high, which will form scale.
7. Flower fertilizer: After the chemical fertilizer and marine aquaculture water are configured for the first time, the TDS value is measured, and the number can be used for future configuration.
8. Fish farming: Goldfish tanks can be used to measure their values, and know the cleanliness. If the value increases, you should change the water in time.
9. Pure alcohol: pure alcohol TDS value is 0, greater than 0 means impure.

Instructions Of Water Purity Test Meter Pen :
1. Remove the protective cap.
2. Turn on the TDS Meter.
3. Immerse the meter into the water/solution up to the maximum measuring level.
4. Wait until the display stabilizes, the TDS meter automatically compensates temperature.
variations.Once the readout is stabilized(30-45 seconds),press "HOLD" button to save reading.
5. After usage, shake off water from your meter or wipe it with a tissue.

Technical Parameters Of Water Purity Test Meter Pen :

Package :