Rechargeable Battery Flow Measurement Devices IP68
|
DOF6000-P Portable Doppler Open Channel Flow Meter
The DOF6000 series DOF6000-P Portable Doppler Open Channel Flow Meter consists of Flow calculator and the Ultraflow QSD 6537 Sensor. The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers, streams, open channels and pipes. When used with a companion Lanry DOF6000 Calculator, flow rate and total flow can also be calculated. The flow calculator can calculate the cross-sectional area of partially filled pipe, open channel stream or river, for stream or river, with up to 20 coordinate points describing the river’s shape of cross section. It is suitable for various applications The 6537 Instrument has a 4 electrodes conductivity instrument (EC) included to measure the quality of the water, with four electrodes exposed to the water at the top of the instrument. Water quality is measured on an ongoing basis and this parameter can be recorded along with velocity and depth to better analyse the nature of the water in open channels and pipes.
Features:
Specification: Sensor
Velocity Range Instrument range is 20mm/s - 12m/s Ranges are software configurable. Default range: 20mm/s to 1.6m/s unidirectional Accuracy Typical ±1% Resolution 1 mm/s Depth (Ultrasonic) Range 20mm to 2000mm/5000mm (Default 5000mm) Accuracy ± 1% of full scale Resolution 1 mm Depth (Pressure option) Range 0mm to10000mm Accuracy ± 1% of full scale Resolution 1 mm Temperature Range 0°C to 60°C Accuracy ±0.5°C Resolution 0.1°C Conductivity Range 0 to 200,000 µS/cm ± 1% of measurement Resolution ±1 µS/cm The EC may be recorded as a 16-bit value (0 to 65,535 µS/cm) or a 32-bit value (0 to 262,143 µS/cm) Tilt (accelerometer) Range ±70° in roll and pitch axes. Accuracy ±1° for angles less than 45° Power Requirements Voltage range 10 to 24 V DC Supply current 50uA standby, 150mA active for 1 second @12V Power source 12 V DC - typically an external battery Communications SDI-12 Velocity, depth, temperature and diagnostic features Connection Single cable up to 50 metres long (standard fitment is 15m) Software Compatible with Starlog V4 Modbus (RS485) Parameters measured by the instrument are readable The Sonic software configuration utility can be used to configure the instrument via Modbus RS485. Baud rate and parity are selectable Environmental Operating 0°C to 60°C (water temperature) Storage -20°C to 60°C Humidity 100 % RH Physical Dimensions Approximately L 135 mm, W 50 mm, H 20 mm Material Epoxy-sealed body, stainless steel mount Weight 200g Cable 15 metre Cable options User-specified, up to 50 metres
Packing & Delivery PackingWith years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support. DeliveryHigh Accuracy Low Cost Wall Mount Flow Meter standard meter: 3-7 days Special meter: pls contact us Express, by air, by sea can be optional. |
Product Tags: open channel flow measurement devices open channel water flow meter |
![]() |
Portable flow meter for open channel area speed ultrasonic flow meter |
![]() |
DN20 Sewer Fiberglass Ultrasonic Open Channel Flow Meter |
![]() |
1mm Resolution Non Intrusive Ultrasonic Liquid Flow Meter |
![]() |
IP68 Ultrasonic Open Channel Flow Meter |
![]() |
Accurate Ultrasonic Open Channel Flow Meter |
![]() |
4-20mA Ultrasonic Open Channel Flow Meter , Ultrasonic Flume Flow Meter |