RS485 Mod-Bus IP68 Open Channel Flow Meter

RS485 Mod-Bus IP68 Open Channel Flow Meter

RS485 Mod-bus Lora ultrasonic flow meter for Open channel and partially pipes has a higher reliability than other forms of the instrument, when under the dirt, corrosive liquids case. The Flow Meter for Water is used to measure the water flow rate in the open-Channel and Partially Filled Pipes.DOF6000 series DOF6000 Digital River Water Flow Meter consists of flow calculator,and the integrated DOF6537 transducer to measure velocity and level at the same time.

6537 instrument is suitable for use in a wide range of water qualities, from sewage to potable water including sea water. However, it may not be as effective in clean, gas-free water.

6537 instrument measures velocity in both directions. With a companion Lanry Ultraflow software the instrument can be programmed to compute flow rate and total flow in pipes and open channels of known dimensions. Simply mount it on, or near the bottom of the water channel. The Instrument’s low-profile form-factor minimises disturbance to the flow it’s measuring.

RS485 Mod-Bus IP68 Open Channel Flow Meter​ features:

1. RS485/MODBUS output, can contact computer directly.
2. One instrument can measure the velocity, depth and conductivity at same time.
3. Velocity Range : 0.02mm/s to 10m/s bi-directional, accuracy is 1%.
4. Depth is measured by both the pressure sensor and ultrasonic level sensor principles.
5. With coordinate correction and pressure compensation function.
6. IP68 Epoxy-sealed body design, long time under water.
7. 20 coordinate points to describe the river’s shape of cross section.

Specification: