YG10 Tungsten Carbide Cutting Tool Inserts For CNC MachiningTungsten Carbide Cutting Tool are mainly composed of tungsten
carbide and cobalt powder. They are made by metallurgical mixing,
crushing, ball milling, pressing and sintering The alloy is mainly
composed of WC and Co, with different contents of WC and Co for
different purposes, so it is widely used As it is a rectangular
plate (or square plate), it is also called tungsten carbide plate Technological Process of Tungsten Carbide Cutting ToolPulverizing → Formula according to use requirements → Wet grinding
→ Mixing → Crushing → Crushing → Drying → Screening → Adding
molding agent → Re drying → Blending after screening → Granulating
→ Forming → Pressing → Forming → Sintering → Forming (blank) → Flaw
detection → Packaging → Warehousing Performance characteristics of Tungsten Carbide Cutting ToolCarbide billet has excellent hardness, high hardness, good wear
resistance, high elastic modulus, high compressive strength,
chemical stability (acid resistance, alkali resistance, high
temperature oxidation resistance), low impact toughness, low
expansion coefficient, and heat resistance. Very good features. Cemented carbide billets are mainly used to manufacture copper,
aluminum, stainless steel, cold-rolled plate, EI plate, Q195, SPCC,
silicon steel sheet, hardware, standard parts, high-speed lifting
die, multi-stage progressive die punch and other plates. It is also
the first choice for manufacturing high-temperature parts,
wear-resistant parts, shielding parts and corrosion resistant
parts.
Tungsten Carbide Cutting Tool Garde & Technical ParametersGrade | Co% | Hardness HAR | Density g/cm | Flexural strength MPa | Elastic modulus GPa | Thermal expansion coefficient 10/C | Application | JX10 | 10 | 91.7 | 14.4 | 4300 | 490 | 5.4 | Copper, aluminum and other thin sheets with thickness less than
0.2mm | JX15 | 12 | 92.5 | 14.1 | 4500 | 460 | 5.8 | Copper, aluminum, stainless steel, etc | JX20 | 13 | 90.6 | 14.1 | 4100 | 460 | 5.8 | Strong applicability, copper, aluminum and other thin sheets | JX35A | 12 | 89.8 | 14.2 | 3400 | 470 | 5.7 | Q195, SPCC and other cold rolled sheets | JX36 | 15 | 89.4 | 13.8 | 3900 | 430 | 6.3 | EI, SPCC and other cold rolled sheets | JX40A | 12 | 88.9 | 14.2 | 3300 | 470 | 5.7 | Q195, SPCC and other cold rolled plates, high-speed stamping dies
and multi station progressive dies | JX45A | 15 | 87.9 | 13.9 | 3200 | 440 | 6.1 | Die for silicon steel sheet, cold rolled sheet, hardware and
standard parts | JX55 | 20 | 86.4 | 13.5 | 3100 | 390 | 6.8 | Silicon steel sheet, upper and lower punches |
|