K30 Cemented Tungsten Carbide Bars With Good Hardness And Toughness
Tungsten carbide bars can be divided into tungsten steel rods
for PCB tools, solid tungsten carbide bars, single straight hole
tungsten steel rods, double straight hole tungsten steel rods,
double spiral hole tungsten steel rods, three spiral hole tungsten
steel rods, etc. Rod; According to the molding process, it can be
divided into extrusion molding and molding molding. The difference
is that the extruded rod has a beautiful appearance and is easy to
grind; the advantage of the molded rod is that the density is
relatively uniform, but it is not conducive to grinding.
Specification Table of tungsten carbide bar
| WC bar / rod | Diameter | Length |
| Type | Size (mm) | Tolerance (mm) | Size (mm) | Tolerance (mm) |
| JX040-50 | 4 | +0.2～0.4 | 50 | 1 |
| JX050-50 | 5 | +0.2～0.4 | 50 | 1 |
| JX060-50 | 6 | +0.2～0.4 | 50 | 1 |
| JX060-60 | 6 | +0.2～0.4 | 60 | 1 |
| JX080-60 | 8 | +0.2～0.4 | 60 | 1 |
| JX100-75 | 10 | +0.2～0.4 | 75 | 1.5 |
| JX100-100 | 10 | +0.2～0.4 | 100 | 2 |
| JX120-75 | 12 | +0.2～0.4 | 75 | 1.5 |
| JX120-100 | 12 | +0.2～0.4 | 100 | 2 |
| JX140-100 | 14 | +0.3～0.5 | 100 | 2 |
| JX160-100 | 16 | +0.3～0.5 | 100 | 2 |
| JX200-100 | 20 | +0.3～0.5 | 100 | 2 |
Tungsten Carbide Rods Picture:
Processing of tungsten carbide bars
- Cemented carbide may be damaged or defective due to impact or
excessive processing load.
- During the processing, please confirm that the product has been
firmly fixed on the installation platform before operation, and
there is no looseness.
- Cemented carbide is not impact resistant. Do not use metal hammers.
- Cemented carbide is not easy to be adsorbed on the magnet. When
using a magnet (magnet), please make sure that the product is
firmly fixed before operation.
- The machined surface after grinding is very smooth and the edges
and corners are very sharp. Please be careful when taking processed
products.
Application of tunsten carbide bars
Tungsten carbide bars are a kind of ultra-fine particle
tungsten steel material. This tungsten steel bar has the
characteristics of high hardness, good bending strength, wear
resistance, not easy to collapse, and not easy to break. It is a
special material for micro-drills and is widely used in tungsten
steel milling cutters, engraving knives and wear-resistant parts.
