K10 Cemented Tungsten Carbide Sheets With High Wear Resistance And
HardnessThe tungsten carbide sheets are mainly made by mixing tungsten
carbide and cobalt powder, and is made by metallurgical methods
such as crushing, pressing and sintering. The main alloy components
are WC and Co. The content of WC and Co in tungsten carbide sheets
for different purposes is different, and they are widely used. It
is named after a rectangular sheet (or square), also known as a
tungsten carbide plate. Application of tungsten carbide sheets- It is widely used for high-speed cutting turning tools, kiln
structural materials, jet engine parts, cermet materials,
resistance heating elements, etc.
- It is used for manufacturing cutting tools, wear-resistant parts,
melting crucibles of copper, cobalt, bismuth and other metals, and
wear-resistant semiconductor films.
- It is used as superhard tool material and wear-resistant material.
It can form solid solution with many carbides. WC tic co cemented
carbide tools have been widely used.
Tungsten Carbide Sheets Picture:Tungsten Carbide Sheets Garde & Technical Parameters| Grade | Co% | Hardness
HAR | Density
g/cm | Flexural strength
MPa | Elastic modulus
GPa | Thermal expansion coefficient
10/C | Application | | JX10 | 10 | 91.7 | 14.4 | 4300 | 490 | 5.4 | Copper, aluminum and other thin sheets with thickness less than
0.2mm | | JX15 | 12 | 92.5 | 14.1 | 4500 | 460 | 5.8 | Copper, aluminum, stainless steel, etc | | JX20 | 13 | 90.6 | 14.1 | 4100 | 460 | 5.8 | Strong applicability, copper, aluminum and other thin sheets | | JX35A | 12 | 89.8 | 14.2 | 3400 | 470 | 5.7 | Q195, SPCC and other cold rolled sheets | | JX36 | 15 | 89.4 | 13.8 | 3900 | 430 | 6.3 | EI, SPCC and other cold rolled sheets | | JX40A | 12 | 88.9 | 14.2 | 3300 | 470 | 5.7 | Q195, SPCC and other cold rolled plates, high-speed stamping dies
and multi station progressive dies | | JX45A | 15 | 87.9 | 13.9 | 3200 | 440 | 6.1 | Die for silicon steel sheet, cold rolled sheet, hardware and
standard parts | | JX55 | 20 | 86.4 | 13.5 | 3100 | 390 | 6.8 | Silicon steel sheet, upper and lower punches |
Performance characteristics of tungsten carbide sheetsTungsten carbide sheet has good hardness, wear resistance, elastic
modulus, high compressive strength, and chemical stability (acid
resistance, alkali resistance, high temperature and oxidation
resistance). At the same time, it has the characteristics of low
impact toughness and low expansion coefficient, and its thermal
conductivity and electrical conductivity are similar to those of
iron and its alloys. |
