Square / Hexagonal Titanium Round Bar Alloy Rod Polished Surface

• Shape: Round bar, Square /flat bar, Hexagonal bar, Rectangle bar
• Finish: Sand blasted, Pickled, Machined (Turned or center-less grinded)
• Condition: Cold rolled(Y)~Hot rolled(R)~Annealed (M)~Solid Status
• Application: Industrial, medical, aviation, military, salt-making, petrochemical, metallurgy, electronics, etc.

Testing:

Tensile Strength

Yield Strength

Fracture toughness

Liquid penetrant

Ultrasonic

Technical requirements:
1. The chemical composition of titanium and titanium alloy rods shall comply with the requirements of ASTM B348.

When repeated inspection is required, the allowable deviation of the chemical composition

shall comply with the requirements of ASTM B348.
2, hot working rod diameter or side length of their tolerance to comply with Table one.
3. After hot working, the diameter of the cold-drawn bar should be in accordance with industry regulations.
4. The out-of-roundness of the bar after lapping (grinding) after hot working should not be more than half of its dimensional tolerance.
5. The indefinite length of the processed bar is 300-6000mm, the indefinite length of the annealed bar is 300-2000mm,

and the fixed or double length should be within the range of the indefinite length. The allowed deviation of the fixed length is + 20mm

The length of the ruler should also be included in the cut of the bar, each cut is 5mm.

The length of the ruler or ruler should be specified in the contract.