10T A6 Two purpose overhead bridge crane with grab and magnet for
customeized QP type grab electromagnetic double-girder bridge crane has both a
grab and an electromagnetic sucker. The electromagnetic sucker
mainly uses the electromagnetic principle to transport steel
objects, and the main part is a magnet. When the current is turned
on, the electromagnet will firmly attract the steel object and lift
it to the designated place. Cut off the current, the magnetism
disappears, and the steel item is put down. Electromagnetic cranes
are very convenient to use, but they can only be used when there is
current. They can be used in scrap steel recycling departments and
steel making workshops. The electromagnetic crane can generate a strong magnetic force, and
dozens of tons of iron sheets, iron wires, iron nails, scrap iron
and other iron materials can be easily collected and transported
without packing, packing or bundling. The operation is labor-saving
and the work is simplified. Steel materials and machines in wooden
crates can be handled similarly. When the crane is working, as long
as the current in the electromagnet coil does not stop, the heavy
objects that are sucked up will not fall, and the invisible
magnetic force is more reliable than a solid chain. If the power is
cut off for some reason, the crane generally has a safety
protection device and a battery, which can generally be maintained
for about half an hour after the power failure, so as to avoid
accidents such as power failures that cause the objects attached to
the disk to fall and cause accidents. Cranes cannot handle hot
iron, because hot steel cannot be magnetized. The grab electromagnetic bridge crane is also equipped with a grab,
which can be used to grab scraps and other objects. Therefore, this
type of crane can meet the two work occasions of grabbing and
adsorbing steel waste, and has a wide range of applications. 1. Grab electromagnetic dual-purpose bridge crane operating room is
separated and closed.2. The entrance of the control room
platform of the grab electromagnetic dual-purpose bridge crane is
divided into three types: side surface, end surface and top
surface.
3.Added height for cart bumpers.
4. Grab electromagnetic dual-purpose bridge cranes are divided into
indoor and indoor types. When ordering, the technical
requirements such as the maximum and minimum temperature of the
working environment and the type of power supply should be
indicated.
5. An overload limiter, a large-screen display and various
protection devices are added, which further increases the safety
during
use.
6. The aerial operation method generally adopted by the grab
electromagnetic dual-purpose bridge crane. | 起重量Lifting Weight | t | 55 | 1010 | 16/16 | | 跨度Span | m | 10.5 | 13.5 | 16.5 | 19.5 | 22.5 | 25.5 | 28.5 | 31.5 | 13.5 | 16.5 | 19.5 | 22.5 | 25.5 | 28.5 | 31.5 | 19.5 | 22.5 | 25.5 | 28.5 | 31.5 | | 最大起升高度Max Lifting Height | 抓斗Grab | m | 20 | 18 | 22 | | 电磁Magnet | 16 | 22 | 22 | | 工作级别Working class | A6 | | 速度Speed | 起升hoisting | 抓斗Grab | m/min | 40.1 | 10.26 | 41.8 | | 电磁magnet | 20 | 19.4 | 16.4 | | 小车运行 handcar travel | 44.6 | 45.6 | 43.2 | | 大车运行Trolley travel | 93.7 | 113 | 112.5 | 101 | 87.3 | | 电机Motor | 起升Hoisting | 抓斗Grab | Type/kw | YZR225M-8/22 | YZR208S-10/37 | YZR315M-10/75 | | 电磁Magnet | YZR200L-6/22 | YZR280S-10/37 | YZR250M2-6/45 | | 小车运行 handcar travel | YZR132M2-6/3.7 | YZR160M1-6/5.5 | YZR160M2-6/7.5 | | 大车运行Trolley travel | YZR160M2-6/7.5×2 | YZR160L-6/11×2 | YZR160M2-6/7.5×2 | YZR160L-6/11×2 | YZR200L-8/1.5×2 | | 最大轮压Max.wheel pressure | 室内Indoor | KN | 106 | 113 | 120 | 131 | 134 | 151 | 161 | 171 | 159 | 173 | 186 | 196 | 209 | 219 | 229 | 241 | 253 | 264 | 275 | 283 | | 室外Outdoor | 111 | 118 | 125 | 136 | 140 | 156 | 166 | 177 | 163 | 177 | 190 | 199 | 213 | 223 | 233 | 245 | 258 | 271 | 281 | 289 | | 抓斗Grab | 型号Model | u | 113 | 109 | 110 | 105 | 106 | 101 | 102 | 127 | 123 | 124 | 119 | 120 | 115 | 116 | 141 | 137 | 138 | 133 | 134 | 129 | 130 | | | 类型Type | 轻型 | 中型 | 重型 | 超重型 | 轻型 | 中型 | 重型 | 超重型 | 轻型 | 中型 | 重型 | 超重型 | | | 容积volume | m3 | 2.5 | 1.5 | 1 | 0.75 | 5 | 3 | 2 | 1.5 | 8 | 4.8 | 3.2 | 2.5 | | | 容重Density | t/m3 | ≤1 | >1-1.7 | >1.7-2.5 | >2.5-3.3 | ≤1 | >1-1.7 | >1.7-2.5 | >2.5-3.3 | ≤1 | >1-1.7 | >1.7-2.5 | >2.5-3.3 | | | 自重Dead weight | kg | 2633 | 2549 | 2615 | 2506 | 2568 | 2479 | 2546 | 4800 | 4803 | 4866 | 4850 | 4913 | 4730 | 4793 | 7841 | 7993 | 8143 | 8008 | 8159 | 8155 | 8305 | | 电磁盘Magnet | 型号Model | MW1-6 | MW1-6 | MW1-6 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-16 | MW1-45 | MW1-45 | MW1-45 | | 吸重Pull weight | kg | 4540 | 4540 | 4540 | 3330 | 3330 | 3330 | 3330 | 8330 | 8330 | 8330 | 8330 | 8330 | 8330 | 8330 | 14330 | 14330 | 14330 | 14330 | 10450 | 10450 | 10450 | | 自重Dead weight | 460 | 460 | 460 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 1670 | 5550 | 5550 | 5550 | | 直径Diameter | mm | 776 | 776 | 776 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1180 | 1650 | 1650 | 1650 | | 荐用钢轨steel track recommended | 43kg/m QU70 | QU70
90×90 | | 电源Power source | 三相交流3-PhaseA.C.50Hz 380V |
WHY US Henan Mining Crane Co., Ltd. (hereinafter referred to as "Henan Mining") was established in
2002. The company has a registered capital of 1.177 billion yuan, a construction area of 1.62 million square meters, more than 4,500 employees, and more than 3,500 sets of advanced processing equipment. ). Specializing in the research
and development, production, sales and service of more than 110 types of cranes and accessories in three series of "KUANGYUAN" brand bridge cranes, gantry cranes and electric hoists. As a
professional crane and material handling product manufacturer and
service provider, it can provide customers with overall solutions
and full life cycle services, and is committed to the intelligent,
green and high-quality development of the crane industry. The company is a national high-tech enterprise, with a technical team composed of more than 10 top
industry experts and more than 200 middle and senior engineers,
responsible for the innovative design and development of products.
At present, it has obtained more than 300 national patents and provincial scientific and
technological achievements. Provide strong support to promote the innovative development of
the lifting industry. It is the company's long-cherished wish to "build a century-old
mineral resource and create a first-class enterprise". The company
takes "filial piety culture" as the core value of the corporate culture, in accordance with
the development goal of "three hearts and six best", wins the world with integrity, cooperates with friends from all
walks of life, and is committed to leading the high-quality development of the
crane industry. 1Q: How can you ensure the quality? A: Before delivery, every product with quality certification will
be tested strictly by QC teams. You are also warmly welcomed to our
factory to make the inspections. Meanwhile, also support live
factory view & crane inspection. 2Q: What's your delivery period? A: Within 10/25/40 days after your prepayment received. Exact
period should be based on detailed requirements and actual period. 3Q: What's your warranty period? A: 18 months for cranes accepted. 4Q: Do you have engineer oversea installation service? A: Yes, we could provide the crane supervision, installation,
commissioning & training. 5Q: What kinds of products do you have? A: All kinds of industrial crane (especially non-standard);
Overhead Crane; Gantry Crane, Jib Crane, Wire Rope Hoist; Electric
Winch, etc. 6Q: Could we buy spare parts in local once they are out of work? A: Our main electrical parts brand is SIEMENS or Schneider or S E
W brand; it's very easy to buy all the world. But if there is any
difficulty, we can post to you by express, such as DHL, UPS, FEDEX,
Aramex, etc. 7Q: Do you provide lift tools or crane parts? A: Yes, we can provide any kinds of related parts such as hoists,
motor, wheels, hang beam, travel beams, enclosed bus bar, lift
clamp, grab, magnet , pulley blocks, C hook, wire rope, drum, etc. |
