Remote Control Single Girder Beam E.0.T Crane Partial Hanging Hoist Trolley
|
Top quality remote control single girder or beam Partial hanging hoist trolley E.0.T crane
Product description of LDP model single girder partial hanging hoist trolley eot crane : LDP electric single-girder crane is a small-size low headroom crane. The electric hoist is at one side of the girder, which increases the workspace. It is applicable to the places where the workshop’s headroom is low. The crane is composed of a box-shaped girder weld by steel plates, an end girder, crab frame, and a fixed electric block. The crab is partially hung and runs at one side of the g rider. The electric hoist is raised to the upside of the girder from under the girder, which effectively increases the lifting altitude. The crab is braked by a conical motor and driven by exposed gear. The girder, of box-shaped structure and bias rails, has horizontal wheels at the upper and the lower, so that it is safe and reliable and can avoid rail gnawing. The trolley adopts a separate drive, conical motor brake and exposed gear drive. The traveling motor can be ae soft start motor and variable-frequency adjustable-speed motor according to user requirements. The crane can start steadily and runs safely and reliably. It has three operation modes: ground handle, wireless remote control and cab. The cab has two types, open cab and closed cab. The span of it is 7.5-22 5m(subject to non-standard design according to user s requiremnts). The classification group is A3 and the operating ambient temperature is-25℃~40℃
Safety system of LDP model single girder partial hanging hoist trolley eot crane: Overload protection in the event of overload, the hoist unit switches off and only the lowering motion is possible Long and cross travel limited by means of preliminary and final limit switches or Wireless anti-collision device Anti-falling protection for the Three-in-One electric motor of trolley and crane prevents from accidental falling All movements can be switched off by actuating the emergency-off switch at the control station via a main contact High quality long time bearing polyurethane materials buffer fixed at the end of trolley travelling and crane travelling to prevent over traveling Safety hook latch used for avoiding the lifted material out off from the hook Audible and visual alarm device to inform the person stay near by the travelling crane. Rain Cover for lifting mechanism of outdoor cranes, electric cabinet and driving mechanism Protective earth conductor is fitted as standard Voltage lower protection system Current overload protection system
Drawing of LDP model single girder partial hanging hoist trolley eot crane: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: Remote Control Single Girder E.0.T Crane Hanging Hoist Trolley E.0.T Crane 20m/min Single Girder E.0.T Crane |
![]() |
Electric Single Girder Overhead Crane With Grab 5 Ton LDA Type |
![]() |
Remote Control Single Girder Overhead Travelling Crane With Electric Double Flap Grab |
![]() |
EOT Single Girder Travelling Bridge Crane 20 Tons 30m / Min For Workshop |
![]() |
LDA Type 5T Single Girder Overhead Crane 440 V With Electric Hoist |
![]() |
10T LDA Type Single Girder Bridge Crane 3Ph With Electric Hoist |
![]() |
Finely Processed Single Girder Crane 10Ton Explosion Proof Electric For Workshop |