5 Ton Single Beam Foundry Crane Remote Control Traveling Overhead Casting Crane

1. LDY metallurgical single beam overhead crane is mainly used for metallurgical and foundry places where molten metal is lifted. Its lifting mechanism is YHⅡ metallurgical electric hoist, and its lifting capacity is no more than 10t.

2. The bottom of the main beam of the crane adopts special heat insulation treatment; the working environment temperature is -10℃~60℃, and the relative humidity does not exceed 50% at a temperature of 40℃. Other places where molten non-metallic materials and hot solid metals are lifted can also be used as reference.

Product photo of Top quality 5Ton single beam remote control traveling overhead casting crane:

Main Features of Top quality 5Ton single beam remote control traveling overhead casting crane :

1,Strong box type, one whole shape main beam welded by robot machine, very strong and beautiful.
2, Sand blast for the whole crane steel structure, to make sure the paint is very strong.
3, Six action direction movement, to get enough working area.
4, Anti high temperature
5, Full safety system as follows:
Weight overload protection
Emergency stop system
Over current protection
Short-circuit protection
Phase sequence protection
Zero position protection,Voltage loss protection
Limit switch and stopper for crane long traveling and cross traveling
Overhigh lift and overlow lift limit switch

Attention:

Safety is the most important issue for cranes. To ensure safety, it is forbidden to use the equipment in flammable, explosive or corrosive environments. (Explosion-proof type is required for this).