Surface Roughness Tester TMR360 Technical Data | Measurement Range | The Z axis (vertical) | ±80μm/±160 µm(enhanced model) | | The X axis (Transverse) | 17.5mm | | Resolution | The Z axis (vertical) | 0．01μm/±20μm | | 0．02μm/±40μm | | 0．04μm/±80μm | | 0．08μm/±160μm | 22 Parameter | Ra,Rz,Rq,Rt,Rp,Rv,R3z,R3y,Rz(JIS),Rs,Rsk,Rsm,Rku,Rmr,Ry(JIS), Rmax,
RPc, Rk, Rpk, Rvk, Mr1, Mr2) | | Graphic | Bearing area curve, Roughness profile, Primary profile | | Filter | RC,PC-RC,Gauss,D-P | | The sampling length(lr) | 0.25, 0.8, 2.5mm | | Assessment length(ln) | Ln= lr×n n=1~5 | | Sensor | Measuring method | skidded | | Stylus tip | Diamond, 90 cone angle, 5μmR | | Force | <4mN | | Skid part | hard alloy, skid radius of curvature: 40mm | | Traversing speed | lr=0.25, Vt=0.135mm/s | | lr=0.8, Vt=0. 5mm/s | | lr=2. 5, Vt=1mm/s | | Return Vt=1mm/s | | Accuracy | Less than ±10% | | Repeatability | Less than 6% | | Power supply | Built-in Lithium ion battery, Charger :DC5V,900mA | | Outline dimension | Main unit: 200*130*30mm drive: 23*27*115mm | | Weight(main unit) | Around 490g | | working Environment | Temperature: - 20℃ ~ 40℃ Humidity: < 90% RH | | Store and Transportation | Temperature: - 40℃ ~ 60℃ Humidity: < 90% RH |
MAIN FEATURE - Mechatronics and ergonomics design, small size, light weight, easy
to operation
- The stylus drive unit can be stored within the main unit for
standard measurement, or separated from the display unit by using
the supplied cable which allows more flexible measurement in any
orientation. The driver can be separated and reattached in one
simple step.
- DSP chip control and data processing, high speed, low power
consumption
- 22 Parameters: Ra ,Rz, Rq, Rt, Rp ,Rv, R3z, R3y, Rz(JIS), Rs, Rsk,
Rsm, Rku, Rmr, Ry(JIS), Rmax,RPc, Rk, Rpk, Rvk, Mr1, Mr2
- Measurement range up to 160μm (can be optional to 320μm)
- 4 inches OLED screen, wide viewing angle, excellent readability
display.
- Can be operated using buttons and has menu.
- It provide Bluetooth Capability , support wireless connection with
mobile and mini printer.
- Built-in lithium-ion rechargeable battery and control circuit, high
capacity, no memory effect, it works over 55 hours while fully
charged, and there is remaining charge indicator, charging hint
- Large capacity data storage, 100 item of raw data and curves can be
stored
- Real-time clock setting and display for easy data recording and
storage
- With auto sleep, auto power off, power-saving features
- Reliable circuit and software design to preventing the motor stuck
- Language: Chinese and English switch freely
- All parameters or any of the parameters which set by users can be
printed
- Optional accessories: Bluetooth capability, curved sensor, pinholes
sensors, measurement, stand, extension rod, printer
- Portable Surface Roughness Tester TMR360 complies with
international standards ISO, DIN, ANSI, JIS
- 8 types of different probes can choosing ,can make the sensor as
customers parts test needs ,like our TS11X ,Can test the narrow
deep hole ,others can not test this special parts.
STANDARD DELIVERY | ITEM | QTY | | TMR360 Main body | 1 PC | | Sensor TS100 | 1 PC | | Calibration block and bracket | 1 PC | | Bracket for Calibration Block | 1 PC | | Height adapter | 1 PC | | Power Charger & USB Cable | 1 PC | | | | | User manual | 1 PC | | Instrument case | 1 PC | | Warranty | 2 Years |
OPTIONAL ITEMS | Image | Description | | TS55 - Extending Rod, extending rod increases the depth for pickup to enter the part.
Length of extending rod is 50mm. | | TS90 - Right Angle Rod, change the position of the sensor, mostly use for measure surface
of particular groove. | | TS100 - Standard Sensor, to measure most of the plane, inclined plane, cone surface, inner
hole, groove and other surface roughness, in addition to the
standard sensor, other special sensors are needed to measure the
measuring platform. | | TS110 - Curved Surface Sensor, to measure smooth cylindrical surface which radius is larger than
3mm, for the large radius smooth spherical surface and other
surface also can obtain good approximation, need to work with
platform TA1520 or TA1620. | | TS120 - Small hole Sensor, to measure the inner surfaces of holes with radius more than 2mm,
better to work with platform TA1520 or TA1620. | | TS131 - Deep Groove Sensor, measure groove with width wider than 3mm and depth deeper than
10mm, or the surface roughness of step with height less than 10mm,
also can used to measure the planar, cylindrical used with
platform,better to work with platform TA1520 or TA1620. | | TS130- pick up for deep hole
Radius for needle point: 5μm
Angle for needle: 90°
Force for needle: 4mN
Measuring range: 400μm
Min. width of hole: ø2mm
Max. depth of hole: 20mm | | TS140- for curved surface
Radius for needle point: 5μm
Angle for needle: 90°
Force for needle: 4mN
Measuring range: 200μm | | TS11X:The narrow hole ,wideth is above 2mm ,depth is above 3mm
to15mm .or the parts Convex and concave surfaces with curvature
radius above than 3 mm,need with the plate. | | TA1420-Magnetic flexible base for simple test ,easy move and
comfortable using | | TA1520 -Metal Substrate Working platform, adjustable height 200mm. With flexible and stable operation and wider application range.
Roughness of complex shapes can also be measured. Measurement stand
enable the adjustment of the position of stylus to be more precise
and measurement to be more stable. If Ra value of measured surface
is relatively low, Using measurement platform is recommended. | | TA1620 -Marble Substrate Working Platform, Features Elevating the table through screw, and V shape groove is available,
it is suitable for testing tiny workpiece to improve the accuracy Specifications Dimensions: 400 mm×250 mm×70 mm Y-axial range: 300mm±1mm | | Standard Roughness Calibration Block Multi-engraved lines (Square
Wave) Made by optical glass, with high hardness, high accuracy standard
roughness value, anti-scratch, has longer life than metal roughness
block. Meet standard GB/T19067.1-2003 and ISO5436-1:2000 Approximation: Ra=0.1um, 0.2um, 0.4um, 0.8um, 1.6um, 3.2um, 6.4um Customized Value and Sine Wave available. | | Standard Roughness Calibration Block Single engraved lines Made by optical glass, with high hardness, high accuracy standard
roughness value, anti-scratch, has longer life than metal roughness
block. Meet standard GB/T19067.1-2003 and ISO5436-1:2000 Approximation: Ra=0.1um, 0.2um, 0.4um, 0.8um, 1.6um, 3.2um, 6.4um) Customized Value available. | | Roughness Comparator (30 pcs/set) This set contains standards of the six most important machining
methods in the prevalent "AA" values. These surface roughness is
used to compare and determine the degree of the surface finish by
comparision method and eye estimation or magnifying glass.The
surface rough contast blocks is made of 45 super carbor steel
except the GCr15 which is using to plat lapping the sample block.
All 30 speciments are calibrated in u''AA (Arithmetical Average)
and in the metric equivalents um Ra. | | Charge and Cable for Surface Roughness Tester Charger: US and EU standard optional Cable: USB interface | | Mini thermal printer External printer, connect by USB interface, suitable for TMTECK
models. | | Thermal printing paper Suitable for mini thermal printer and TMTECK tester with built-in
printer Packing: 10pcs/bag |
TEST Phote Can OEM for measure 18mm Deep groove Like below: Welcome your enquiries! |
