Product introduction
MA-8A rapid moisture tester is a combination of halogen lamp and
SRA structure radiant heat to achieve high-speed uniform heating
and shorten the test time. The halogen lamp tube can be replaced by
itself and the SRA filter can be cleaned easily. Provide the most
advanced lamp tube monitoring isolation window design to prevent
the lamp tube from splashing when the measuring object is heated.
Detailed introduction of MA-8A rapid moisture tester:
1. The SHS fast and sensitive weighing sensor is adopted, so that
very few samples can get very accurate moisture measurement under
high-precision weighing. During the test, the drying state can be
directly confirmed, and the end time can be speculated.
2. The MA-8A rapid moisture tester has the function of automatic
peeling, even if it is continuously measured, it can also be
accurately measured by zero drift correction.
3. Provide the most advanced lamp tube monitoring isolation window
design to prevent the lamp tube from splashing when the measuring
object is heated.
4. Halogen lamp and uniquely designed SRA (secondary radiation
assistant device) radiator are used to shorten the measurement time
and form a fast and uniform heater.
5. Measurement result storage function
6. It can record and output calibration data and measurement data
to meet the requirements of quality management and certification.
7. Built in R232C output interface, optional and connected to
printer and computer.
8. Super large high resolution back lit dot matrix LCD.
9. The components are easy to operate. The MA-8A rapid moisture
tester is ergonomically designed with a disc handle to avoid
accidents such as burns when hot samples are put in or taken out.
The wing handle makes the heating cover easy to open and close.
10.Guarantee of low maintenance cost, no need to stop when users
replace halogen lamps, and the protected compartment is easy to
clean.
Technical parameters:
| 1 | Weighing range | 120g/0.001g |
| 2 | Scale size | Φ 90mm |
| 3 | Reading accuracy | 0.001g |
| 4 | Heating source | halogen lamp |
| 5 | Temperature sensor | PT-100 |
| 6 | Test temperature range | 60 ºC - 200 ºC |
| 7 | Test temperature accuracy | 1 ºC |
| 8 | Moisture measuring range | 0.00% - 100.00% |
| 9 | Test moisture accuracy | 0.01% |
| 10 | Repeatability | 0.005 |
| 11 | Weight | 4.5kg |
| 12 | Overall dimension | 360x215x170mm3 |
