Introduction:
This Rusting Prevention Testeris mainly used to test the rust preventing characteristics of
mineral oil with inhibitor, especially the gas turbine oil when
mixed with water.
The Rusting Prevention Tester is also suitable for detecting other oil products, such as
hydraulic oil, circulating oil and liquid with specific gravity of
water.
The operating principle is: mix a certain amount of sample with
distilled water or synthetic seawater, immerse all cylindrical
sample steel rods in it, and stir at a certain temperature. After
the test period (usually 2 weeks), observe the corrosion trace and
degree of the steel bar of the sample.
Main features :
1. The Rusting Prevention Testerhas a separate mute mixer, one or more tests can be selected at will;
2. Each mixer controls the speed and test time separately, and
stops automatically after the test;
3. Sputter type multi channel liquid circulator can ensure the
temperature uniformity of each point;
4. The Rusting Prevention Testerhas sliding automatic positioning device, mixing blades do not need to
be adjusted;
5. Safety protection device to prevent low liquid level;
6. The Rusting Prevention Tester has 4 working positions, 6 units is also expandable.
Specifications
| Test standard | GB/T11143, ASTM D665, ISO7120, DIN51585, IP135, NFT60151 |
| Temp.control method | imported PID temperature controller |
| Temp.control accuracy | 60±0.1ºC |
| Heating method | electrical heating tube |
| Working position | 4 units(6 units is optional) |
| Timing method | Digital timer |
