16 CFR 1633 Mattress Flammability Testing Equipment by ISO 9705-2
|
Detailed Product Description
16 CFR 1633 Mattress Flammability Testing Equipment
AIC-9705 Mattress Flammability Test Equipment.pdf IntroductionThis mattress test apparatus is designed according to GB/T
34441-2017, it can test combustion performance of soft furniture
mattress exposed to flame ignition source. The test part of this equipment can meet the requirements of GB/T
20286, GA 111-1995, ISO 9705-2, GB/T 27904-2011 and GB/T 25207-2010
"Test Method for Solid Room Fire of Surface Products"
Standards
FeatureMain features 1.Testing room: Testing room can be built as closed or open(CFR
1633 standard requires test room can be built as closed or open.) Closed test room: The room is made of rock wool board. There are no openings except
door and video surveillance windows The size of the test room is 3660 ± 25mm in length, 3050 ± 25mm
in width and 2438 ±25mm in height. The door is 2032 ± 6 mm high and 965 ± 6 mm wide. Quartz glass monitor window, size 150x150mm. The fume hood is located outside the door (smoke outlet) to
collect smoke; Open test room: The fume hood is positioned directly above the sample and the
bottom edge is 2400 mm away from the ground. Conical collector size: 3000mm X 3000mm, height 1000mm The conical collector has 900mm X 900mm X 900mm X 900mm cubic
mixing chamber on the top, and the mixer is installed inside 2.The smoke exhaust pipe consists of a diversion section (x2), a
straight section, a measuring section and a fan The measuring section is equipped with wind speed probe,
thermocouple, optical system and sampler. Smoke exhaust capacity of fan is not less than 0.5m³/s 3.Control cabinet 19 inch standard cabinet, simple appearance, science and
technology Control system center, integrated computer, display, analyzer,
cold trap, control and data acquisition system. 19 inch display, Labview control software, electronic control and
pneumatic configuration panel. Computer: CPU I3, memory 4G, hard disk 500G Win7/Win10 system 4.Equipped with imported analyzer (domestic analyzer is optional) Measurement of Gas Concentration of O2, CO2 and CO. O2:The range is 0-100%, the error is less than 0.01%, the
repeatability is less than 0.01%, and the response time is less than 7s. CO2: Range: 0-10%, error: 1% FS, repeatability < 2%, response
time < 7s CO: range 0-1%, error 1% FS, repeatability < 1%, response time
< 8s 5.Optical system, one-button 5-level automatic transmittance
calibration device.Light source is 0.5mW Laser Generator. Imported Silicon-based Amplified Photoelectric Detector Imported filters (25%, 50%, 79%) Motor Driven Optical Wheel and Positioning Device 6.Wind Speed Control System Two-way probe, 304 stainless steel,
32mm in length and 14mm in diameter, separated into two separate
chambers Imported Micro-differential Pressure Transmitter, Range 0-2000
Pa, Resolution 1%FS Three-phase frequency converter fan, closed-loop control of
frequency converter, wind speed can be set, adjustable 7.Gas sampling system Sampler, 304 Stainless Steel Ash filter, secondary filter, precision filter (0.2um),
three-stage filter system, remove impurity particles in sample gas. Refrigerator, compressor condenser, precise control of the
temperature of gas collected at 4℃±1℃, condensation dewatering Deep filtration of moisture in sample gas by discolored silica
gel Aspirator pump:gas sampling system adopts sampling diaphragm pump
displacement of 10L/min~50L/min 8.Gas control system Burner:consisting of two T-shaped burners, surface burner and
side burner Surface burner Stainless steel pipe, diameter 12.7 mm, wall thickness 0.89 + 0.5
mm. Burner length 306mm, sealed at both ends. There are 17 holes in the length of 136 mm on both sides of the
central axis. The distance between holes is 8.5 mm, the diameter of
holes is 1.45-1.53 mm, and the hole and the horizontal plane are
5°. Side burner Stainless steel pipe, diameter 12.7 mm, wall thickness 0.89 ± 0.5
mm Burner length 255mm, sealed at both ends There are 14 holes in 110 mm length on both sides of the central
axis, with a distance of 8.5 mm and an aperture of 1.45-1.53mm. Mass Flow Controller Mass Flow Controller, control the Gas Flow Accurately. Surface burner, flow rate 12.9L/min. Side burner, flow rate
6.6L/min. Surface and side burner heat release rate total 27KW Ignition Controller 15KV High Voltage Pulse Electron Fire Flame detection function, ignition failure or flame extinction,
the controller will automatically cut off the gas valve. 9.Weighing system (optional, standard GB 20286, GBT27904) The weighing system adopts C3 imported weighing sensor, and the
weighing data is collected linearly and stored automatically. Waterproof design of weighing system to prevent damage to heavy
system during fire fighting 10.Video recording 12 Megapixel HD Camera Video Recording Software 11. Software The interface of LABVIEW is modern, simple and rich in functions. The software adopts modular design, independent modules such as
system setup, system calibration, test, test report, etc. The test data can be read by engineering units and physical
units, and displayed by data windows and curves and charts. The data you want to view can be selected by checking. Provide preview function of test report, which can be printed or
saved as Excel or PDF. Test parameters can be viewed and corrected. The test curve can be scaled and dragged. The original data, test results and test reports are provided |
| Product Tags: 16 CFR 1633 flammability testing ISO 9705-2 flammability testing Mattress Flammability Testing Equipment |
Related Products
|
NFPA 701Flammability Tester For Flame Propagation Of Textiles And Films Apparatus |
|
Horizontal and Vertical Flame Test Equipment by IEC 60707 |
|
Rate Of Heat Release OSU Tester For Aviation Material Fire Testing |
|
Textiles and Films Flame Propagation Tester by NPFA 701 Method 2 |
|
ASTM E1537 Upholstered Furniture Large Calorimeter for Combustion Performance test |
|
SPI Vinyl Plastic Film 45 Degree Flammability Tester by 16 CFR 1611 |
Email to this supplier