Introduction:
This Combustibility Test Chamber is designed and manufactured in accordance with DIN 53438 & ISO
11925-2 standard.
It uses the German Kleinbrenner principle to determine the
combustion properties of building materials under direct impact
from a small vertical flame. It is applicable to building material
categories of B, C, D, E, Bfl, Cfl, Dfl and Efl testing.
The Combustibility Test Chamber also meets DIN 4102-Part 1-Class B2 test requirements.
Features:
The combustion chamber is made from corrosion resistant stainless
steel, to maximize operating life.
Combustibility Test Chamber has large front and side doors for easy access. These are glazed
with toughened glass for full view of the specimen during a test.
An extensively adjustable burner assembly, mounted on runners, to
enable the small premixed flame to be tilted at an angle of
45degree to the specimen and offered to it in one fluid movement.
Specimen holder capable of housing the specimens up to and
including 60 mm thick.
A fully adjustable specimen support frame facilitating lateral
movement of the specimen holder so that the flame can be applied
either at the specimen centre position, or at laterally spaced
points.
Main Parts:
No. | Name |
1 | Multilayer specimen holder |
2 | Loose fill specimen holder |
3 | Anemometer 0-10 m/s range |
4 | Timing device with 0.2 sec divisions |
5 | Pressure reducing valve: Between 10 kPa and 50 kPa |
Parameters:
1 | Dimension | 850 mm (W) X 450 mm (D) X 800 mm (H) |
2 | Weight | 40kg |
3 | Power supply | 110V AC 60Hz / 230V AC 50Hz, 10A |
4 | Ambient temperature | 10 ~ 35 Centigrade |
| 5 | Gas Supply | Propane with a minimum purity of 95% |
