TO-263 LM2596S DC DC Power Modules LM2596S-ADJ ADJ Step Down
|
Detailed Product Description
|
Product Detail
Long-term work is recommended to use current within 2.5A, plus heat sink (10W output or more); Because it is a step-down module, in order to ensure output stability, please maintain a minimum 1.5V differential pressure. * This module is an adjustable step-down module that can be used to change the output voltage by adjusting the blue adjustable resistor on the module. The input and output voltage difference is 2V, and the minimum output voltage is 1.25V. * The IN- (input negative), IN+ (input positive), OUT- (output negative), and OUT+ (output positive) indicated on the module must be connected correctly. Otherwise, the module may be damaged. * This module has no output short circuit protection. If the output is short circuited for a long time, the module may be damaged. Voltage regulation: Connect the power supply (4-35V), adjust the blue potentiometer knob (usually rotate the clockwise to boost, counterclockwise to rotate the buck) and use a multimeter to monitor the output voltage to reach the required voltage. Wiring: 1. Solder, directly solder the power cord to the input (output) port 2. The soldering pin can be inserted into the hole through the lead wire or inserted into the hole plate; or the PCB can be directly soldered after the pin is added.
|
||||||||||||||||||||||||||||
| Product Tags: LM2596S DC DC Power Modules TO-263 DC DC Power Modules ADJ Step Down Voltage Regulator Module | ||||||||||||||||||||||||||||
Related Products
|
50W TPA3116D2 Audio Amplifier Board TPA3116 2.1 Channel |
|
12-36V 100W AMP HIFI TDA7293 Audio Amplifier Board TDA7293 |
|
EG7500 Inverter 40KHZ Power Supply Driver Board With KA7500 TL494 |
|
RS232 EGS002 IR2110 EGS 002 EG8010 Driver Board Module |
|
FZ1200R17KF6C-B2 FZ1200R17KF6C IGBT Power Modules 1700V 1200A |
|
MCC310-16IO1 MCC310 IGBT SCR Module 1600v 500A Thyristor Diode |
Email to this supplier