Non Contact Infrared Thermometer Automatic Touchless Soap Dispenser
|
Detailed Product Description
|
Instructions
1. There are two power supply modes for this product, which
supported by 4AA batteries or 5V DC power supply. 2. Switch the power bitton to ON, the power light is on, ans the
display will show 000, whenthe forehead or wrist is 0-5cm away from
the infrared sensor or the product, the result will be showed on
the display and also reported by voice, the testing indicator light
will light up the corresponding color simultaneously. 3. When the body temperature is nmal at 32-37.5 ℃, the display
shows the current measured temperature and the voice prompts that
the current temperature is normal with the green light of the test
indicator lighting up. 4.When the body temperature is abnormal at 37.6-28.1 ℃, the
display shows the current measured temperature and the voice prompt
that the current temperature is too hight with the yellow light of
the test result indicator lighting up. 5.When the body temperature is in an abnormal state between
38.2 ℃ -42.9 ℃, the display shows that the current
measured temperature and voice prompts taht the current body
temperature is too high with the red light of the test result
indicator lighting up. 6.When the measured temperature is lower than 34℃, the display
shows low with the voice prompt the current measured temperature. 7. When the measured tempurature is higher 42.9 ℃, the display
shows high, and the voice prompt re-measure. 8. When the measuring until is select as ℉, the temperature taht over 100 ℉ is only display as an
integer. Meanwhile, only test result is reported by voice, actural
temperature will not be reported . 9. When the language is selected as English, only test result is
reported by voice, actual temperature will not be reported. 10.After the body temperature detection is completed, place your
hand at the bottom liquid outle within 5 CM. After the liquid
sensor detects the object, it will automatically flow out the hand
sanitiser to the hand for disinfection and sterilization. There are
3 level for liquid output. Time of liquid output: about 1.5s in L1,
about 2s is L2, about 2.5s in L3. 11. When there is no human body detecting temperature for more than
15 seconds, the system will enter the standby more intelligently,
and the display shows 000. When the infrared sensor senses that
human body, the system will automatically wake up and enter
the temperature measurement mode. Product features
Technical parameters
Support Installable
Wall Mounting Installable
Liquid replacement procedure |
||||||||||||||||||||||||||||||||||||||||||
| Product Tags: Thermometer Non Contact Infrared Thermometer IR touchless hand soap dispenser |
Related Products
|
1000ml Automatic Touchless Soap Dispenser |
|
Disinfectant Automatic Touchless Soap Dispenser |
|
ABS Hand Soap Dispenser Touchless |
|
Stainless Steel Standing Floor 700ML Automatic Touchless Soap Dispenser |
|
Adjustable Dose 0.8ml 1.6ml Automatic Foam Dispenser |
|
Battery Operated Plastic 700 ML Automatic Foam Soap Dispenser |
Email to this supplier