High Strength Anchoring Epoxy Low Odour Strong Stability Molecular Structure

360ml 5:1 Two Component Adhesive Anchoring System For Structural Strengthening

Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,

Chemical anchoring system used for anchoring and rebar connections in concrete.

Item #: FixingChor136

Capacity: 360ml

Materials: Epoxy

Mixing Ratio: 5:1

Product Description:

360ml Adhesive Anchoring System is a two-component, Styrene Free system for use as a high strength, non-shrink anchor grouting material. adopted with modified epoxy resin and composite materials,  Its advantage on steel bar planting has been proved by many testimonies. Compares with other adhesive, it is a new high performance, Eco-friendly anchoring adhesive which has strong bonding strength and high efficiency as well as irritation free and low odor.

Advantages

• High bonding strength, good flexible performance similar as embedded.
• acid-resistant, good shock resistance, stress-free fixed;
• good thixotropy, particularly applicable to the sides or top surface anchoring;
• two-cylinder direct-mix package, with a dedicated glue gun without manual mixing

• Ageing resistance, good heat tolerance and does not creep at ambient temperature;

• Low sensitivity in moist condition with long term load stability;

Application:

• All concrete building without embedded steel bar
• Reinforcement and reconstruction of buildings with concrete
• Reinforcement and reconstruction of Railway, Road, Bridge, Water resources, Tunnel, etc.
• Reinforcement for equipment, pipeline installation, supports of curtain wall.

Technical Parameter:

Main Performance

Processing Method

1 Tools

• Electric hammer
• Hole cleaning brush
• Air compressor
• Glue gun

2 Attention

• Drill as per requested hole dia. and depth
• Clean the hole completely
• Inject from the bottom of the hole and pull out the gun slowly.
• After planting the bar, let the gel harden in still.

• Processing Flow

     Drilling: As per technical data

     Cleaning: using pump or compressed air and brush to clean the hole completely.

    Assembling and Injection: Mount the static mixer onto the bottle, push out some incomplete mixed gel at the front part,then inject from the          bottom of the hole, to fill 1/2 to 2/3 depth of the hole.

    Bar planting: spin slowly the bar or screw into the hole, adjust up and down for several times to make the gel average, but don’t touch it during hardening time.

    Curing and Maintenance: According to the temperature of the base materials, give enough time to harden and start to load mounting until it        hardened completely.

Curing time:

Consumption Chart (holes per cartridge)

Packaging:

• One cartridge with one mixer in carton
• 12pcs/20pcs/30pcs per carton.
• Xinchor label or your own label.
• EXP Date on the top of cartridge.
• Customized Packing.

Shipping:

• Shipments can be arranged by sea, air, courier express.
• Courier express includes DHL, FedEx, TNT, UPS, EMS, SF, etc.