External Steel Bonding Epoxy Low Moisture Sensitivity Modified Stable Mechanical Properties

Columns Jacket Steel Epoxy Adhesive For Bonding To The External Concrete Surfaces

XQ-JGN Steel Plate Bonding Adhesive

JGN Steel epoxy adhesive adopted with nano materials and modified epoxy resin, is a new two component adhesive which has features as bonding with all kinds of base materials (cements, stones, bricks etc.), high strength, strong anchoring, metal and steel plates, fast curing, good acid and alkaline resistance, ageing resistance, etc. Widely used for bonding and reinforcement for conrete with stone and steel plates, as well as all kinds of section units. Good stability within expected period, suitable for heavy section units.

Range of Application

Anchoring reinforcement for water conservancy facilities, docks, roads, bridges and other projects

Repairing and reinforcement for all building of industry and residence, bridge, tunnel, etc.

Reinforcement for all kinds building structures, and steel bonding reinforcement of walls, floors, beams and poles etc.

Features

For bonding between same or different materials of metal, ceramics, plastic, rubber, wood etc.

Excellent thixotropic performance, easy to paint and avoid hollowing and waste;

Good acid and alkali resistance, aging resistance, low moisture sensitivity;

Two component, modified epoxy rein, fast curing at room temperature, good bonding strength, stable mechanical properties

Free base layer adhesive, easy to handle and reduces the effect of construction technology on mechanical properties;

Can be used in wide temperature range, no precipitation;

Product performance

Appearence

Mixed Viscosity: 10-12 Pa.s

Hardened density: 1.50±0.10g/cm³

Mixing ratio: 3:1

Part A (main): White cream

Part B (hardener): Black cream

Available handling time: (25℃): ≥30min

Shelf time: 24 months

Main Performance

Remarks: all the values in the sheet is average.

Processing Flow

• Positioning
• Base materials treatment
• Cleaning
• Mixing the adhesive
• Painting
• Anchoring
• Maintenance

positioning: mark the steel bonding position;

Base material treatment: Remove the painting layer on concrete surface and to drill derust and polish the steel;

Cleaning: using compressed air to blow the surface from dust, clean with acetone;

Mixing the adhesive: according to the weight ratio of A:B=3:1, weigh and mix in the barrel;

Painting: paint the above mixed adhesive onto the surface of concrete and steel plate, do not have bubbles inside;

Anchoring: attach the steel plate directly on the surface of coated concrete, remove the surrounding excess adhesive,then fix with steel frame;

Maintenance: fix for conservation at room temperature no less than 24 hours.

Packaging and Logistics

Two components in separate package, A:B=3:1 20kgs/steel bucket, 60kgs/set

Shall be stored in cool (under 25℃), dry and ventilated place, not exceed 1 year.

This product is not dangerous goods, can be shipped as normal chemical materials.

Attention

Must wear glove, mask and other safety products during processing.

If touched by skin, please treated by using acetone in first and then washed by water.

Do not use too much each time.

Other sizes:

Steel: 3.7L/5.0L/10L/18L/20L Plastic: 4L/5L/10L/15L/20L