Low Density CFRP Sheets , Thin Carbon Fiber Sheets Flame Resistant Waterproof

300gsm Unidirectional Carbon Fiber CFRP Sheets for beam strengthening

Carbon Fiber CFRP Sheets

300gsm Unidirectional Carbon Fiber CFRP Sheets For Beam Strengthening

High strength, unidirectional Carbon Fiber CFRP Sheets pre-saturated to form a carbon fiber reinforced polymer (CFRP sheets) fabric used to strengthen structural concrete elements. its good choice for building beam and columns strengthening. 

To complete the reinforcing CFRP sheet system, carbon fibre wrapping of the structural beam will be undertaken. Woven unidirectional carbon fibre CFRP sheets will be wrapped around the beam in a series of over-lapping layers to further strengthen the reinforced concrete.

A mix of usually carbon fibre fabrics, and an epoxy resin, wrapping systems are custom designed for each project and application. Where there is an element of corrosion in the structure, carbon fibre wrapping can be used to both weather-proof corrosion and structurally re-enforce the structure. The impervious material will protect a structure from moisture intrusion and further corrosion, reducing the need for ongoing maintenance work.

Advantages of Carbon Fiber CFRP Sheets
• Easy installation
• Corrosion resistance
• Short construction period
• No maintenance required
• Light weight, no influence to original structure
• Low cost, cost effective compared with other methods

Product performance

1) Specification: 300g/㎡

2) Appearance: black woven fabric

3) Weave: unidirectional;

4) Strength class: high strength grade I,

5) Length: 50 m, 100 m

6) Width: 100mm, 200mm, 300mm, 500mm, other sizes can be customized

Remarks: all data are average values.

Processing Flow:

1. Unloading
2. Base layer treatment
3. glue resin on base layer
4. leveling
5. paste Carbon Fiber CFRP Sheets ( please pay attention for safety as the carbon fabric is conductive
6. Inspection
7. Surface protecting and decoration.

Attention

1, carbon fabric CFRP sheet is conductive, please leave far away from electrical equipment and power supply, or take reliable protection

2, carbon fabric CFRP sheet bent should be avoided in the process

3, the surface should be clean and dry;

4, temperature theoretically should be 5-40 ℃