Flexural Woven Carbon Fiber CE Approved Customized Size Mechanically Strong

200gsm Unidirectional Cfrp Carbon Fiber Fabric With High Strength

CFRP carbon fiber wrap for bridge, beam, columns

200gsm Unidirectional Cfrp Carbon Fiber Fabric With High Strength

High tensile strength, unidirectional carbon fiber fabric is consist of carbon fiber reinforced polymer (CFRP) system used to strengthen structural concrete.These fabrics are applied onto the surface of existing structural members in buildings, bridges and other structures. The result is an externally bonded CFRP (carbon fiber reinforced polymer) reinforcement system engineered to increase the structural performance.

The primary benefit of CFRP systems versus traditional retrofit and repair methods is that significant flexural, lateral, axial or shear strength gains can be achieved with an easy-to-apply composite that does not add significant weight or mass to the structure of building, highway, bridge, tunnel.

To complete the reinforcing system, carbon fibre wrapping of the structural beam will be undertaken. Woven unidirectional carbon fibre fabric will be wrapped around the beam in a series of over-lapping layers to further strengthen the reinforced concrete.

Features:

• Easy installation

• Corrosion resistance

• Short construction period

• No maintenance required

Product performance

Weight: 200g/sqm

Thickness: 0.111mm

Density: 1.8g/cm³

Packing: 100 meters/roll

Width:100mm, 200mm, 300mm, 500mm or to be customized.

Main Performance According to China National Standard GB50728-2011

Remarks: all data are average values.

Storage Condition:Store dry at 40°-95° F(4° -35°)

Shelf Life: 50 years

Color:Black

Carbon Fiber Type: 0° (unidirectional)

Attention

1, carbon fabric cloth is conductive, please leave far away from electrical equipment and power supply, or take reliable protection

2, carbon cloth bent should be avoided in the process

3, the surface should be clean and dry;

4, temperature theoretically should be 5-40 ℃

5, Processing in rain and outdoor is prohibited

6, If relative humidity is greater than 85% or condensation on the concrete surface, Processing is not allowed;

7, Matched resin shall be stored sealed and away from fire and direct sunlight.

8, The place of the formulation and use of resins should maintain good ventilation;

9, on-site workers should take appropriate protection measures.