High Accuracy Digital Forehead Thermometer , Non Contact Medical Thermometer

Digital Infrared Forehead Thermometer , Non Contact Medical Thermometer

Medical Instrucment, Mute Medical Electronic Forehead Thermometer

The infrared thermometer is equipped with the advanced technoloty and high sensitive sensor, allows you get an accurate reading in 1 second.The range of accuracy is only ± 0.2 ° C (only ± 0.4 °F). Note: To avoid cross-infection, please avoid direct contact with skin.

It features memory function, can record the temperature value of the last 32 times and track the temperture fluctuation. Also with fever alarm function, ˚C / ˚F adjustable, Color LCD backlight, Auto shut-down within 10 seconds to save battery power.

With the LCD display and silent mode setting, you can get the measurements within 1s by one-key service easily in the dark without disturbing your baby's sleep, more safer than traditional mercury thermometer.

The main function:

1. Two function keys: 【MODE】, 【MEASURE】
2. Forehead display range of temperature: -10 ℃ ~ 90 ℃, [14 ° F ~ 194 ° F], below -10 ℃ shows LO, above 90 shows HI, bright green light
3. Body body temperature display range: 32 ℃ ~ 42 ℃, [89.6 ° F ~ 107.6 ° F], below 32 ℃ shows lo, bright yellow light;

Above 42 ℃, HI is displayed and red light is on.

4. The Body temperature is 32 ℃ -34.3 ℃, the green light is on, and no good is displayed.
5. Body temperature between 34.3 ℃ ~ 37.3 ℃, [93.7 ° F ~ 99.1 ° F], showing good, green light
6. Body temperature between 37.4 ℃ ~ 38 ℃, [99.2 ° F ~ 100.4 ° F], display light, bright yellow light
7. Body temperature between 38.1 ℃ ~ 42 ℃, [100.5 ° F ~ 107.6 ° F], showing fever, bright red light
8. Temperature measurement period: 2 seconds
9. Temperature detection accuracy ± 0.2 ℃
10. Measuring distance 1cm-10cm, 3cm distance is best
11. Temperature measurement results show: good, slight, fever, corresponding green / yellow / red light backlight reminder
12. forehead temperature conversion into body temperature
13. Press the key during the measurement-dynamic process, the data at the end of the measurement stays on the display data for easy recording and reading of the measurement data
14. Temperature display format selection (℃ / ℉)
15. Beep sound prompt when temperature measurement ends, sound prompt when measurement ends
16. Low voltage detection function
17. 28 ±5 seconds to turn off the screen without a button and enter standby