Gr1 Gr2 Gr5 Titanium Wire Coil
|
Astm b863 gr1 gr2 gr5 gr7 gr12 2.4mm 3.2mm titanium welding wire in coil
Titanium welding wire has excellent welding process performance, beautiful weld formation, and its welded metals have excellent comprehensive mechanical properties.
Titanium wire specifications A. Titanium wire specifications: φ0.8-φ6.0mm B. Spectacle titanium wire specification: φ1.0-φ6.0mm special titanium wire C. Titanium wire specification: φ0.2-φ8.0mm special for hanging tool
Grade TA0, TA1, TA2, TA3, TA4, TA5, TA6, TA7, TA9, TA10, TC1, TC2, TC3, TC4, TC6, TC11, GR1, GR2, GR3, GR5 Ti6AL4V ELI, Ti6AL7Nb, Ti13Nb13Zr, Ti1533
standard
surface use
Precautions for using titanium welding wire: (1) Construction workers and welders should wear clean white gauze gloves (no cotton gloves are allowed). (2) It is strictly forbidden to touch and touch iron objects by hand in the treated welding area. (3) Welding work should be performed indoors as much as possible, and the ambient wind speed should be ≤0.5m / s to avoid being affected by the wind. (4) When welding, short arc welding should be used as much as possible, with a small welding heat input, and the angle between the nozzle and the weldment should be 70-80 degrees. (5) When the butt pipe is positioned and welded, its butt gap is generally about 0.5mm. (6) Each welding seam should be completed as much as possible. The welding seams must be connected. Before welding, the joints should be cleaned. The length of the welding meat overlap is 10-15mm. (7) When welding, the welding torch should not swing left and right, and the melting end of the welding wire must not move out of the gas protection area. (8) Gas should be supplied in advance when welding arc initiation. Welding torch cannot be lifted immediately when arc is extinguished. Gas supply should be delayed until the temperature drops below 250 ℃. (9) The distance between the gas shield and the welding torch should be short, and the gap in contact with the pipe wall should be small. When performing butt welding of pipes, in order to meet the requirements of single-sided welding and double-sided forming, the welding is performed in two times: one for back-sealing welding (without filler materials when back-sealing), and the other for forming welding. In multi-layer welding, the previous bead must be completely cooled before the next bead is welded. (10) Welding must be completely cleaned of surface impurities such as
oil, rust, and moisture. added to enhance the protection effect.
Production Process of titanium wire: Titanium sponge→compacting electrodes→melting→forging→bar billets→hot rolling→cold draw→titanium wires
Surface quality: high precision, good finish, no oxidation color, no cracks, peeling, thorns, marks and inclusions. Minor local scratches, abrasions, spots and pits that do not exceed the allowable deviation of the wire diameter are allowed.
Detailed pictures:
Welcome to contact! Email: fred@lihua-group.com Phone number (WhatsApp and Wechat): +86 18909172760
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: thin titanium wire pure titanium wire |
![]() |
Customizable Length Grade 2 Titanium Alloy Wire ASTM F136 ISO Certified Medical Titanium Wire Gr1 Gr2 Gr3 |
![]() |
Titanium Welding Wire ErTi1 Titanium Alloy Wire Grade 1 Grade 5 3D Printing Metal |
![]() |
Customizable Length ASTM B348 Certified Gr1 Gr2 Pure Titanium Wire For Welding In Industrial Settings |
![]() |
Pure Titanium And TI-6AL-4V Titanium Welding Wire | ASTM F136/F1341 Certified For Medical Applications |
![]() |
Pure Titanium Wire 0.6mm, 0.8mm, 1mm | TI-6AL-4V Titanium Welding Wire for Medical Applications |
![]() |
ASTM F136/F1341 Pure Titanium and Ti-6Al-4V Weld Wire for Medical Applications |