Grade 2 Grade 5 Titanium Round Bar

In order to ensure the service life of equipment products, we must use tcorrectly, and so is the titanium rod. Now, let Baoji

Lihua titanium introduce the precautions for using titanium rods:

First, when using titanium rods, pay attention to avoid scratches and collisions, and also pay attention to dust and oil.

Second, the working pressure during use must not exceed the rated working pressure, otherwise various problems will also

occur.

In normal use, there should be at least 3-5 minutes of low-pressure start-up time, the relative pressure difference should be

controlled below 0.5Mpa, and then the working pressure should be gradually adjusted to normal needs (higher pressure does

not exceed 0.4Mpa).

4. After the product runs for a certain period of time, the pressure may increase due to the clogging of the filter element, and

the flow rate will decrease. It needs to be recoiled or rewashed. The regeneration cycle depends on the rated pressure and flow.

Baoji Lihua ,a titanium manufacture, with over 15 years export experience.

Our advantagerous products is: titanium bar, titanium wire, titanium flange, titanium forging.

Welcome to contact!