Three Phase AC Backward Curved Industrial Centrifugal Blower Fan

Industrial Centrifugal Exhaust Blower Fan Centrifugal Blower Fan

Introduction

The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure.

Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement.

The fans are divided into general type, explosion-proof type, anti-corrosion type and high temperature type.

Industrial Centrifugal Exhaust Blower Fan Centrifugal Blower Fan is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes.

Technical data

Advantages and Features

1. It can output high outgas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered.

2. In the case of common base, the installation is very simple and requires little support from a professional technician.

3. The bearing housing is reserved for the installation position of the temperature and vibration sensors, and the fan operation monitoring device can be conveniently installed.

4. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.

5. Customized design according to customer's performance requirements, and optimized by CFD technology, the energy consumption is lower than similar models.

6. The tight fit between the components and the good sealing performance ensure that the output pressure is not reduced.

7. The impeller is subjected to a high standard of dynamic balance correction to ensure stable operation of the fan.

8. After the production is completed, after running test and vibration value detection, the operation is reliable.

9. There are a variety of options to choose from.

FAQ

1. What parameters need to be provided when you design the industrial centrifugal fans?

Answers: Air flow, total pressure or static pressure, inlet temperature, local voltage and frequency, Altitude etc.

If there is flammable and explosive gas, or big dust loading in the medium, please also inform the designer.

2. How about your company’s pre-sales service and after-sales service?

Answers: Before our cooperation, we have the professional technical team to help you make the technical solution according to your working condition, to make sure the centrifugal fan efficiency operation.

After sales service, we will offer 12 months’ repairing service, and provide lifelong follow-up services. Besides, our engineers are available for going abroad to offer the repairing service.

3. Does your company have qualifications?

Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV certifications and so on.