SH126C Coolant Foam Tendency Tester Room temp ～ 100 ℃ Glassware Method ASTM D1881

SH126C Coolant foam tendency tester

The SH126C engine coolant foam tendency tester is designed according to the requirements of the petrochemical industry standard of the People's Republic of China SH/T0066 Determination of Engine Cooling foam Tendency (Glassware Method), and is applicable to the determination of diluted or concentrated engine coolant foam according to the determination method of SH/T0066 standard.

The instrument consists of a glass bath, an electric control box, an electric heater, an intelligent digital temperature controller, a single-chip timer, two 500ml heat-resistant glass measuring cylinders, two gas flow meters, and two sets of gas diffusion heads. Instrument structure and technical conditions comply with standard requirements ASTM D1881

Principle: dilute the sample with distilled water, ventilate for 5 minutes with constant flow of air at 88 ± 1 ℃, and measure its foam volume and foam disappearance time. The index requirements are: the volume of foam is not more than 150ml, and the disappearance time of foam is not more than 5s.

Technical Parameter

● Working power supply: AC220V ± 10% 50Hz

● Heating power: 2000W

● Air flow: controlled by precision flowmeter

● Temperature control range: Room temperature ～ 100 ℃

● Timing method: automatic timing, can be set by oneself

● Environmental temperature: -10 ～ +40 ℃

● Relative humidity: ≤ 85%

● Instrument size: 350 * 280 * 360mm

● Weight: 25kg

● Packaging size: 600 * 480 * 580mm

● Packaging weight: 31kg

Note: The appearance pictures, dimensions, volume, and weight of the instrument are for reference only. If there are any updates to the instrument, there may be slight changes without prior notice.

Shandong Shengtai Instrument Co., Ltd. provides the following quality assurance for the instruments sold to you:

----The provided instrument materials are brand new, meet national quality standards, and have a manufacturer's certificate of conformity;

----The materials and main components provided meet the technical requirements specified in the technical documentation;

----The overall quality assurance period of the equipment is one year (excluding normal wear and tear of vulnerable parts).

----We are responsible for free maintenance of any instrument quality issues that occur during the warranty period. Due to equipment malfunction caused by the user's responsibility, we are responsible for repairing and charging reasonable fees.

----Lifetime discounted supply of parts for equipment, and lifetime maintenance and repair of the entire machine.

----After the expiration of the warranty period, if the user needs maintenance and technical services, we will only charge a cost fee.