1.0mm FFC Flexible Flat Cable

FFC Flexible Flat Cable 1.0mm 18p 20p Soft Cable Black Film Flat Wire

Product introduction

Our products are widely used in: tablet computers, stereos, game consoles, fishing detectors, set-top boxes, printers, refrigerators, air conditioners, video cameras, keyboards, pianos, computers, cameras, monitors, televisions, MP4s, telephones, smartphones, Amplifiers, video doorbells, touch screens, automobiles and various security products, digital products and electronic products.

FFC Flexible Flat Cable (FFC) is a new type of data cable made of PET insulating material and extremely thin tinned flat copper wire, which is pressed through a high-tech automation equipment production line. Thin thickness, small size, simple connection, easy disassembly, easy to solve electromagnetic shielding (EMI) and other advantages

Flexible Flat Cable(FFC) can arbitrarily choose the number and spacing of wires, make the connection more convenient, greatly reduce the volume of electronic products, reduce production costs, and improve production efficiency. It is most suitable for moving parts and motherboards, PCB board to PCB board, miniaturization Used as data transmission cable in electrical equipment.Common specifications are 0.5mm, 0.8mm, 1.0mm, 1.25mm, 1.27mm, 1.5mm, 2.0mm, 2.54mm and other flexible cables with various pitches.

Parameter:

Flexible flat flexible cable:

① PITCH (Pitch): 0.5mm 0.8mm 1.0mm 1.25mm 1.27mm 2.0mm 2.54mm

② Conductor specifications: 0.035*0.030, 0.035*0.65, 0.05*0.5, 0.05*0.065, 0.1*0.65, 0.1*0.8;

③ Number of cable screens: 2P-120P;

④ Cable length: 15mm-Nm;

Flexible Flat Cable (FFC) Common models are as follows:

Type A: The two ends are connected and the reinforcing plate is pasted on the insulating adhesive paper;

Type B: The reinforcement board is pasted directly on the insulating adhesive paper;

Type C: The reinforcing plates at both ends are directly pasted on the conductor;

Type D: The reinforcement plates at both ends are directly pasted on the conductor cross;

Type E: one end of the reinforcement board is attached to the insulating adhesive paper, and the other end is directly soldered;

Type F: The reinforcing plates at both ends are directly attached to the insulating adhesive paper, and the internal half is peeled off;

Type G: Solder directly at both ends.

FFC technical parameters:

1. Number of conductors N: the number of copper conductors in the cable;

2. Pitch P: the distance between the centerlines of two adjacent conductors;

3. Margin M: the distance between the center line of the outermost conductor and the edge of the cable:

4. Full pitch TP: the distance between the outermost two conductor centerlines, TP=P*(N-1);

5. Total width W: the distance between the two edges of the cable, W=P*(N+1);

6. Total length TL: the distance between the two ends of the cable;

7. Insert thickness TT: the thickness of the two connecting ends of the cable.