10.2g/cm3 Molybdenum Bar Complex Machined Parts In Vacuum Furnace
Molybdenum Accessories
After rolling, forging and drawing, molybdenum and its alloys reach
or close to the theoretical density, further improve the strength,
plasticity and toughness, and improve the forming properties.
Size and tolerance of Molybdenum Rod
| Diameter(mm) | Tolerance of diameter | Length(mm) | Tolerance of length |
| 16-20 | +1.0 | 300-1500 | +2 |
| 20-30 | +1.5 | 250-1500 | +2 |
| 30-45 | +1.5 | 200-1500 | +3 |
| 45-60 | +2.0 | 250-1300 | +3 |
| 60-100 | +3.0 | 250-800 | +3 |
Chemical Composition of Molybdenum rod
| Element | W/% | Element | W/% |
| Pb | <0.0001 | Al | <0.0001 |
| Bi | <0.0001 | Si | <0.001 |
| Sn | <0.0001 | Ca | <0.001 |
| Sb | <0.0001 | Mg | <0.001 |
| Cd | <0.001 | P | 0.0002 |
| Fe | 0.0050 | C | 0.0016 |
| Ni | 0.0007 | N | 0.0020 |
| O | 0.0050 | Mo | 99.98min |
Molybdenum rods, plates can be made with machinable threads.
Molybdenum rods and other products, including machined
parts are widely used as high-temperature furnace components,
glass furnace electrodes, electronic tube components and so on. The
high-temperature strength and recrystallization temperature of
high-temperature molybdenum (doped lanthanum) and molybdenum alloy
(TZM, MoRe) are higher than those of pure molybdenum. It is not
easy to become brittle after high-temperature application.
Molybdenum is a more ideal high-temperature material. Fine
grained molybdenum rod (axial grain size greater than 1000 grains /
mm2) has better comprehensive properties.
Characteristics of Molybdenum Rod
1. High strength at high temperature
2. Good oxidation resistance, corrosion resistance and long
service life
3. Excellent thermal conductivity
4. High melting point
5. Outstanding resistance to electrochemecal corrosion
6. Application temperature environment:1500~1800C
Applications of Molybdenum Rods Parts
Molybdenum parts made of molybdenum rods are mainly used in
heat-resistant equipment, sputtering equipment and high-temperature
furnaces, etc..
Complex machined parts of molybdenum rods are avalible.
