Arc Erosion Resistant W80Cu20 Tungsten Copper Alloy Ring
|
|
Customized Arc Erosion Resistant W80Cu20 Tungsten Copper Alloy Ring
W80/Cu20 Polished tungsten copper is used for arcing contacts in SF6 circuit breakers for ultra high, high and medium voltage applications. At the heart of the switching chamber, WCu contacts are exposed to extreme mechanical and thermal loads: When the circuit is opened and closed, the arc starts directly at the switch contacts at a temperature of up to 20 000 °C.
Specification of W80Cu20 Tungsten Copper Alloy Ring:
W80/Cu20 Polished tungsten copper is popular because of its combination of unique material properties. Ahigh level of temperature resistance is one of the most important advantages of tungsten, while the copper content increases the electrical and thermal conductivity. Contact materials made of WCu are also characterized by the following properties:
No arc erosion: With the right mix of materials.
Good conductivity: High density makes it possible.The denser the material, the better it is at conducting electricity
and heat. One trick for producing WCu in higher densities is to add
nickel during the sintering process. However, too much nickel has a
negative influence on the conductivity of the material. Take
advantage of our employees' experience and benefit from an optimum
balance between material density and conductivity.
Greater endurance: With a well defined grain structure.
The higher the applied voltage is, the more resistant to arc erosion the contact material must be. SANHUI is able to modify the arc erosion resistance of WCu by varying the grain size of its tungsten. For particularly high voltage ranges, we use materials with an extremely fine grain size.
|
|||||||||||||||||||||||
| Product Tags: W80Cu20 Tungsten Copper Alloy Erosion Resistant Tungsten Copper Alloy W80Cu20 tungsten copper ring |
|
High Plasticity Tungsten Copper Alloy W75Cu25 Rod with density of 14.8g/cm3 |
|
W75Cu25 Tungsten Copper Alloy Rods Customized Parts With Density 14.5g/cm3 |
|
15.2g/cm3 Copper Tungsten Plate CuW80 with dimensions of 90x60x30mm |
|
W70Cu30 Tungsten Copper Alloy Plate With Density Of 14.5g/Cm3 |
|
Arc Erosion Resistance Tungsten Copper Alloy Block With Density Of 14.1 - 17.0g/Cm3 |
|
High Electric Conductivity Tungsten Copper Alloy Plate 195HB For Resistance Welding |